Skip to main content
Fig. 7 | BioMedical Engineering OnLine

Fig. 7

From: Integrated particle image velocimetry and fluid–structure interaction analysis for patient-specific abdominal aortic aneurysm studies

Fig. 7

Fluid–structure interaction setup, mesh and boundary conditions. a The CFD domain has 1 inlet with a time varying velocity profile and 1 zero-pressure outlet. The yellow cut plane used for PIV is located at Y = 8 mm. b The FEA domain has two fixed supports upstream and downstream, and all internal walls are assigned as interfaces to the CFD model. c Inlet flow rate as a function of time, based on Deplano et al. d CFD mesh and boundary layer mesh detail

Back to article page

BioMedical Engineering OnLine

ISSN: 1475-925X

Contact us