Skip to main content
Figure 1 | BioMedical Engineering OnLine

Figure 1

From: Biomechanical analysis of the relation between movement time and joint moment development during a sit-to-stand task

Figure 1

The process to obtain movements over a wide range of movement times. The movements of various durations were obtained by linearly lengthening or shortening the movement time of the experimental kinematics data. The stick pictures of the slow movement (1) and the fast movement (3) are the example pictures obtained by lengthening and shortening the movement time of the experimental kinematics data (2), respectively. Through this process, from each experimental trial, sixty-one STS movements having the same movement pattern but different movement times were obtained ranging from 1.0 to 7.0 seconds in 0.1 seconds steps.

Back to article page