Figure 5From: Current density imaging sequence for monitoring current distribution during delivery of electric pulses in irreversible electroporationCurrent density distribution obtained by CDI. Tissues were exposed to 90 high voltage electric pulses with an amplitude of 3000 V and a duration of 100 μs at a repetition rate of 1 Hz. Pulses were delivered between two needle electrodes (marked with + and -). Current density distributions are presented as a vector field (two figures on the left; black and red arrows mark current density distributions that are lower and higher than 10 kA/m2, respectively) and as an absolute value (two figures on the right). Only current densities obtained during first two (pulse number 1 and 2) and last two pulses (pulse number 89 and 90) are presented for easier comparison.Back to article page