Skip to main content
Fig. 5 | BioMedical Engineering OnLine

Fig. 5

From: Effect of manufacturing and experimental conditions on the mechanical and surface properties of silicone elastomer scaffolds used in endothelial mechanobiological studies

Fig. 5

Effect of sterilization technique (UV, ethanol, boiling) on engineering stress–strain curves (a) (n = 3) and on the Young’s modulus (b) for different curing temperatures (n = 3) (Two-way ANOVA, significant effect of curing temperature (***p < 0.0001), significant differences between all temperatures, significant differences between sterilization techniques at 50 °C only)

Back to article page

BioMedical Engineering OnLine

ISSN: 1475-925X

Contact us