Skip to main content
Fig. 13 | BioMedical Engineering OnLine

Fig. 13

From: Temperature-dependent tensile properties of polyamide 12 for the use in percutaneous transluminal coronary angioplasty balloon catheters

Fig. 13

Results of the uniaxial tensile tests on necked PA12 tubes at 23 °C and 37 °C for specimens tested without water, in water, in a saline solution. a Nominal stress vs. strain curves. Sample lying in the center of the of the respective curve array. b Median values of the Young’s Modulus for 23 °C and 37 °C with width of the IQR. c Median values of \({\sigma }_{\mathrm{y}}\) with width of the IQR

Back to article page