Fig. 1From: Low-cost equipment for the evaluation of reach and grasp in post-stroke individuals: a pilot studyFront and back of the board. TDAI consists of a single plate, that can be positioned vertically (T1) or horizontally (T2). On the front of the board (a) the targets of each activity are indicated (targets represented by “x”—T1; items “A” and “B”—T2). The back of the board (b) is intended for fitting the capacitive sensors, referring to the selected targets on the front of the board. Targets related to task 1 were represented by numbers to indicate the sequence to be followed, as well as by rectangles of different colors (c). The targets of task 2 consisted of two circles, where the cup was to be transported from the farthest target and fitted to the nearest target (d)Back to article page