TY - JOUR AU - Mak, A. F. AU - Zhang, M. AU - Boone, D. A. PY - 2001 DA - 2001// TI - State-of-the-art research in lower-limb prosthetic biomechanics-socket interface: a review JO - JRRD VL - 38 ID - Mak2001 ER - TY - JOUR AU - Klute, G. K. AU - Glaister, B. C. AU - Berge, J. S. PY - 2010 DA - 2010// TI - Prosthetic liners for lower limb amputees: a review of the literature JO - Prosthet Orthot Int VL - 34 UR - https://doi.org/10.3109/03093641003645528 DO - 10.3109/03093641003645528 ID - Klute2010 ER - TY - STD TI - Kapp S, Miller JA “Chapter 20 Lower Limb Prosthetic.” ID - ref3 ER - TY - JOUR AU - He, Q. AU - Johnston, J. AU - Zeitlinger, J. AU - City, K. AU - City, K. PY - 2015 DA - 2015// TI - HHS Public Access” JO - PLos ONE. VL - 33 ID - He2015 ER - TY - JOUR AU - Marks, L. J. AU - Michael, J. W. PY - 2001 DA - 2001// TI - Artificial limbs JO - BMJ VL - 323 UR - https://doi.org/10.1136/bmj.323.7315.732 DO - 10.1136/bmj.323.7315.732 ID - Marks2001 ER - TY - JOUR AU - Richardson, A. AU - Dillon, M. P. PY - 2017 DA - 2017// TI - User experience of transtibial prosthetic liners: a systematic review JO - Prosthet Orthot Int VL - 41 UR - https://doi.org/10.1177/0309364616631343 DO - 10.1177/0309364616631343 ID - Richardson2017 ER - TY - STD TI - “Custom Fabrication of Injection Molded Renew™ Silicone Liners.”https://www.smooth-on.com/tutorials/custom-fabrication-injection-molded-renew-trade-silicone-liners/. Accessed 12 Jun 2019. UR - https://www.smooth-on.com/tutorials/custom-fabrication-injection-molded-renew-trade-silicone-liners/ ID - ref7 ER - TY - JOUR AU - Coleman, K. L. AU - Boone, D. A. AU - Laing, L. S. AU - Mathews, D. E. AU - Smith, D. G. PY - 2004 DA - 2004// TI - Quantification of prosthetic outcomes: elastomeric gel liner with locking pin suspension versus polyethylene foam liner with neoprene sleeve suspension JO - J Rehabil Res Dev VL - 41 UR - https://doi.org/10.1682/JRRD.2004.04.0591 DO - 10.1682/JRRD.2004.04.0591 ID - Coleman2004 ER - TY - STD TI - Sanders J. “Stump-socket interface conditions” in Pressure Ulcer Research: Current and Future Perspectives, 2005; 129–147. ID - ref9 ER - TY - JOUR AU - Klute, G. K. AU - Rowe, G. I. AU - Mamishev, A. V. AU - Ledoux, W. R. PY - 2007 DA - 2007// TI - The thermal conductivity of prosthetic sockets and liners JO - Prosthet Orthot Int VL - 31 UR - https://doi.org/10.1080/03093640601042554 DO - 10.1080/03093640601042554 ID - Klute2007 ER - TY - JOUR AU - Al-Fakih, E. A. AU - Abu Osman, N. A. AU - Mahmad Adikan, F. R. PY - 2016 DA - 2016// TI - Techniques for interface stress measurements within prosthetic sockets of transtibial amputees: a review of the past 50 years of research JO - Sensors. VL - 16 UR - https://doi.org/10.3390/s16071119 DO - 10.3390/s16071119 ID - Al-Fakih2016 ER - TY - JOUR AU - Paterno, L. AU - Ibrahimi, M. AU - Gruppioni, E. AU - Menciassi, A. AU - Ricotti, L. PY - 2018 DA - 2018// TI - Sockets for limb prostheses: a review of existing technologies and open challenges JO - IEEE Trans Biomed Eng VL - 65 UR - https://doi.org/10.1109/TBME.2017.2775100 DO - 10.1109/TBME.2017.2775100 ID - Paterno2018 ER - TY - JOUR AU - Hsu, C. -. H. AU - Ou, C. -. H. AU - Hong, W. -. L. AU - Gao, Y. -. H. PY - 2018 DA - 2018// TI - Comfort level discussion for prosthetic sockets with different fabricating processing conditions JO - Biomed Eng Online VL - 17 UR - https://doi.org/10.1186/s12938-018-0577-2 DO - 10.1186/s12938-018-0577-2 ID - Hsu2018 ER - TY - JOUR AU - Herbert, N. AU - Simpson, D. AU - Spence, W. D. AU - Ion, W. PY - 2005 DA - 2005// TI - A preliminary investigation into the development of 3-D printing of prosthetic sockets JO - J Rehabil Res Dev VL - 42 UR - https://doi.org/10.1682/JRRD.2004.08.0134 DO - 10.1682/JRRD.2004.08.0134 ID - Herbert2005 ER - TY - STD TI - Comotti C, Regazzoni D, Rizzi C, Vitali A. Multi-material design and 3D printing method of lower limb prosthetic sockets,” in ACM International Conference Proceeding Series. 2015; 42-45). ID - ref15 ER - TY - JOUR AU - Sengeh, D. M. AU - Herr, H. PY - 2013 DA - 2013// TI - A variable-impedance prosthetic socket for a transtibial amputee designed from magnetic resonance imaging data JO - J. Prosthetics Orthosis VL - 25 UR - https://doi.org/10.1097/JPO.0b013e31829be19c DO - 10.1097/JPO.0b013e31829be19c ID - Sengeh2013 ER - TY - JOUR AU - Nayak, C. AU - Singh, A. AU - Chaudhary, H. AU - Tripathi, A. PY - 2016 DA - 2016// TI - A novel approach for customized prosthetic socket design JO - Biomed Eng Appl Basis Commun. VL - 28 UR - https://doi.org/10.4015/S1016237216500228 DO - 10.4015/S1016237216500228 ID - Nayak2016 ER - TY - JOUR AU - Tzeng, M. J. AU - Hsu, L. H. AU - Chang, S. H. PY - 2015 DA - 2015// TI - Development and evaluation of a CAD/3DP process for transtibial socket fabrication JO - Biomed Eng Appl Basis Commun. VL - 27 UR - https://doi.org/10.4015/S1016237215500441 DO - 10.4015/S1016237215500441 ID - Tzeng2015 ER - TY - JOUR AU - Colombo, G. AU - Filippi, S. AU - Rizzi, C. AU - Rotini, F. PY - 2010 DA - 2010// TI - Computers in Industry A new design paradigm for the development of custom-fit soft sockets for lower limb prostheses JO - Comput Ind VL - 61 UR - https://doi.org/10.1016/j.compind.2010.03.008 DO - 10.1016/j.compind.2010.03.008 ID - Colombo2010 ER - TY - JOUR AU - Truby, R. L. AU - Lewis, J. A. PY - 2016 DA - 2016// TI - Printing soft matter in three dimensions JO - Nature VL - 540 UR - https://doi.org/10.1038/nature21003 DO - 10.1038/nature21003 ID - Truby2016 ER - TY - JOUR AU - Gul, J. Z. PY - 2018 DA - 2018// TI - 3D printing for soft robotics–a review JO - Sci Technol Advanc Mater VL - 19 UR - https://doi.org/10.1080/14686996.2018.1431862 DO - 10.1080/14686996.2018.1431862 ID - Gul2018 ER - TY - JOUR AU - Dhokia, V. AU - Bilzon, J. AU - Seminati, E. AU - Talamas, D. C. AU - Young, M. AU - Mitchell, W. PY - 2017 DA - 2017// TI - The design and manufacture of a prototype personalized liner for lower limb amputees JO - Procedia CIRP VL - 60 UR - https://doi.org/10.1016/j.procir.2017.02.049 DO - 10.1016/j.procir.2017.02.049 ID - Dhokia2017 ER - TY - JOUR AU - Crabtree, P. AU - Dhokia, V. G. AU - Newman, S. T. AU - Ansell, M. P. PY - 2009 DA - 2009// TI - Manufacturing methodology for personalised symptom-specific sports insoles JO - Robot Comput Integr Manuf. VL - 25 UR - https://doi.org/10.1016/j.rcim.2009.04.016 DO - 10.1016/j.rcim.2009.04.016 ID - Crabtree2009 ER - TY - STD TI - Selinger D. Weight of prefabricated transtibial gel prosthetic liners a standardized sample. ID - ref24 ER - TY - JOUR AU - Laszczak, P. AU - Jiang, L. AU - Bader, D. L. AU - Moser, D. AU - Zahedi, S. PY - 2015 DA - 2015// TI - Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications JO - Med Eng Phys VL - 37 UR - https://doi.org/10.1016/j.medengphy.2014.10.002 DO - 10.1016/j.medengphy.2014.10.002 ID - Laszczak2015 ER - TY - JOUR AU - Laszczak, P. PY - 2016 DA - 2016// TI - A pressure and shear sensor system for stress measurement at lower limb residuum/socket interface JO - Med Eng Phys VL - 38 UR - https://doi.org/10.1016/j.medengphy.2016.04.007 DO - 10.1016/j.medengphy.2016.04.007 ID - Laszczak2016 ER - TY - JOUR AU - Klute, G. K. AU - Huff, E. AU - Ledoux, W. R. PY - 2014 DA - 2014// TI - Does activity affect residual limb skin temperatures? JO - Clin Orthop Relat Res VL - 472 UR - https://doi.org/10.1007/s11999-014-3741-4 DO - 10.1007/s11999-014-3741-4 ID - Klute2014 ER - TY - JOUR AU - Huff, E. A. AU - Ledoux, W. R. AU - Berge, J. S. AU - Klute, G. K. PY - 2008 DA - 2008// TI - Measuring residual limb skin temperatures at the skin-prosthesis interface JO - JPO J Prosthetics Orthot. VL - 20 UR - https://doi.org/10.1097/JPO.0b013e3181875b17 DO - 10.1097/JPO.0b013e3181875b17 ID - Huff2008 ER - TY - JOUR AU - Peery, J. T. AU - Ledoux, W. R. AU - Klute, G. K. PY - 2005 DA - 2005// TI - Residual-limb skin temperature in transtibial sockets JO - J Rehabil Res Dev VL - 42 UR - https://doi.org/10.1682/JRRD.2004.01.0013 DO - 10.1682/JRRD.2004.01.0013 ID - Peery2005 ER - TY - JOUR AU - Charkoudian, N. PY - 2003 DA - 2003// TI - Skin blood flow in adult human thermoregulation: how it works, when it does not, and why JO - Mayo Clin Proceed VL - 78 UR - https://doi.org/10.4065/78.5.603 DO - 10.4065/78.5.603 ID - Charkoudian2003 ER - TY - JOUR AU - Cutti, A. AU - Perego, P. AU - Fusca, M. AU - Sacchetti, R. AU - Andreoni, G. PY - 2014 DA - 2014// TI - Assessment of lower limb prosthesis through wearable sensors and thermography JO - Sensors VL - 14 UR - https://doi.org/10.3390/s140305041 DO - 10.3390/s140305041 ID - Cutti2014 ER - TY - JOUR AU - Sanders, J. E. PY - 2019 DA - 2019// TI - A motor-driven adjustable prosthetic socket operated using a mobile phone app: a technical note JO - Med Eng Phys VL - 68 UR - https://doi.org/10.1016/j.medengphy.2019.04.003 DO - 10.1016/j.medengphy.2019.04.003 ID - Sanders2019 ER - TY - STD TI - “DS1923 iButton hygrochron temperature/humidity logger with 8 kb datalog memory absolute maximum ratings electrical characteristics. https://datasheets.maximintegrated.com/en/ds/DS1923.pdf. Accessed 25 Jul 2020. UR - https://datasheets.maximintegrated.com/en/ds/DS1923.pdf ID - ref33 ER - TY - JOUR AU - Shin, M. AU - Patton, R. AU - Mahar, T. AU - Ireland, A. AU - Swan, P. AU - Chow, C. M. PY - 2017 DA - 2017// TI - Calibration and validation processes for relative humidity measurement by a Hygrochron iButton JO - Physiol Behav VL - 179 UR - https://doi.org/10.1016/j.physbeh.2017.06.019 DO - 10.1016/j.physbeh.2017.06.019 ID - Shin2017 ER - TY - JOUR AU - van Marken Lichtenbelt, W. D. PY - 2006 DA - 2006// TI - Evaluation of wireless determination of skin temperature using iButtons JO - Physiol Behav. VL - 88 UR - https://doi.org/10.1016/j.physbeh.2006.04.026 DO - 10.1016/j.physbeh.2006.04.026 ID - van Marken Lichtenbelt2006 ER - TY - JOUR AU - Seminati, E. AU - Canepa Talamas, D. AU - Young, M. AU - Twiste, M. AU - Dhokia, V. AU - Bilzon, J. L. J. PY - 2017 DA - 2017// TI - Validity and reliability of a novel 3D scanner for assessment of the shape and volume of amputees’ residual limb models JO - PLoS ONE VL - 12 UR - https://doi.org/10.1371/journal.pone.0184498 DO - 10.1371/journal.pone.0184498 ID - Seminati2017 ER - TY - STD TI - Seminati E, et al. Residuum volume and shape assessment after lower limb amputation: validity and reliability of a new structured light 3D scanner,” 16th World Congr. Int Soc Prosthetics Orthot ISPO 2017; 316. ID - ref37 ER - TY - JOUR AU - Dhokia, V. G. AU - Newman, S. T. AU - Crabtree, P. AU - Ansell, M. P. PY - 2011 DA - 2011// TI - Adiabatic shear band formation as a result of cryogenic CNC machining of elastomers JO - Proc Inst Mech Eng Part B J Eng Manuf. VL - 225 UR - https://doi.org/10.1177/0954405411415318 DO - 10.1177/0954405411415318 ID - Dhokia2011 ER - TY - STD TI - “Multi-Spectral Dynamic Imaging | FLIR Systems.” https://www.flir.eu/instruments/multi-spectral-dynamic-imaging/. Accessed 14 Jan 2020]. UR - https://www.flir.eu/instruments/multi-spectral-dynamic-imaging/ ID - ref39 ER - TY - JOUR AU - Hanspal, R. S. AU - Fisher, K. AU - Nieveen, R. PY - 2003 DA - 2003// TI - Prosthetic socket fit comfort score JO - Disabil Rehabil VL - 25 UR - https://doi.org/10.1080/09638280310001603983 DO - 10.1080/09638280310001603983 ID - Hanspal2003 ER - TY - STD TI - Use of the Prosthesis evaluation questionnaire (PEQ). JPO J. Prosthetics Orthot. 2006; 18(6): 68–P79. ID - ref41 ER -