Skip to main content
Fig. 2 | BioMedical Engineering OnLine

Fig. 2

From: A current-mode system to self-measure temperature on implantable optoelectronics

Fig. 2

Experimental results; a linear current transfer characteristics of the CCII; b measured voltage at X terminal versus the input current variation in two different VY voltages, 2.8 V and 3.3 V; c, d Monte Carlo post-layout simulation results showing IZ when IX = 100 nA and VX when VY = 3.3; and ef measured voltage and current frequency responses of the CCII with cut-off frequencies at 45 kHz and 130 kHz, respectively

Back to article page