TY - JOUR AU - Wurm, G. AU - Tomancok, B. AU - Pogady, P. AU - Holl, K. AU - Trenkler, J. PY - 2004 DA - 2004// TI - Cerebrovascular stereolithographic biomodeling for aneurysm surgery JO - J Neurosurg VL - 100 UR - https://doi.org/10.3171/jns.2004.100.1.0139 DO - 10.3171/jns.2004.100.1.0139 ID - Wurm2004 ER - TY - JOUR AU - D’Urso, P. S. AU - Thompson, R. G. AU - Atkinson, R. L. AU - Weidmann, M. J. AU - Redmond, M. J. AU - Hall, B. I. PY - 1999 DA - 1999// TI - Cerebrovascular biomodelling: a technical note JO - Surg Neurol VL - 52 UR - https://doi.org/10.1016/S0090-3019(99)00143-3 DO - 10.1016/S0090-3019(99)00143-3 ID - D’Urso1999 ER - TY - JOUR AU - Izatt, M. T. AU - Thorpe, P. L. P. J. AU - Thompson, R. G. AU - D’Urso, P. S. AU - Adam, C. J. AU - Earwaker, J. W. S. PY - 2007 DA - 2007// TI - The use of physical biomodelling in complex spinal surgery JO - Eur Spine J VL - 16 UR - https://doi.org/10.1007/s00586-006-0289-3 DO - 10.1007/s00586-006-0289-3 ID - Izatt2007 ER - TY - JOUR AU - D’Urso, P. S. AU - Earwaker, W. J. AU - Barker, T. M. AU - Redmond, M. J. AU - Thompson, R. G. AU - Effeney, D. J. PY - 2000 DA - 2000// TI - Custom cranioplasty using stereolithography and acrylic JO - Br J Plast Surg VL - 53 UR - https://doi.org/10.1054/bjps.1999.3268 DO - 10.1054/bjps.1999.3268 ID - D’Urso2000 ER - TY - JOUR AU - Brie, J. AU - Chartier, T. AU - Chaput, C. AU - Delage, C. AU - Pradeau, B. AU - Caire, F. PY - 2013 DA - 2013// TI - A new custom made bioceramic implant for the repair of large and complex craniofacial bone defects JO - J Cranio-Maxillofac Surg VL - 41 UR - https://doi.org/10.1016/j.jcms.2012.11.005 DO - 10.1016/j.jcms.2012.11.005 ID - Brie2013 ER - TY - JOUR AU - Cao, D. J. AU - Yu, Z. Y. AU - Chai, G. AU - Liu, J. AU - Mu, X. Z. PY - 2010 DA - 2010// TI - Application of EH compound artificial bone material combined with computerized three-dimensional reconstruction in craniomaxillofacial surgery JO - J Cranio-Maxillofac Surg VL - 21 UR - https://doi.org/10.1097/SCS.0b013e3181cfe9bc DO - 10.1097/SCS.0b013e3181cfe9bc ID - Cao2010 ER - TY - JOUR AU - Chrzan, R. AU - Urbanik, A. AU - Karbowski, K. AU - Moskala, M. AU - Polak, J. AU - Pyrich, M. PY - 2012 DA - 2012// TI - Cranioplasty prosthesis manufacturing based on reverse engineering technology JO - Med Sci Monit. VL - 18 UR - https://doi.org/10.12659/MSM.882186 DO - 10.12659/MSM.882186 ID - Chrzan2012 ER - TY - JOUR AU - Gander, T. AU - Essig, H. AU - Metzler, P. AU - Lindhorst, D. AU - Dubois, L. AU - Rucker, M. PY - 2015 DA - 2015// TI - Patient specific implants (PSI) in reconstruction of orbital floor and wall fractures JO - J Cranio-Maxillofac Surg VL - 43 UR - https://doi.org/10.1016/j.jcms.2014.10.024 DO - 10.1016/j.jcms.2014.10.024 ID - Gander2015 ER - TY - JOUR AU - Han, S. W. AU - Wang, Z. Y. AU - Hu, Q. G. AU - Han, W. PY - 2014 DA - 2014// TI - Combined use of an anterolateral thigh flap and rapid prototype modeling to reconstruct maxillary oncologic resections and midface defects JO - J Cranio-Maxillofac Surg VL - 25 UR - https://doi.org/10.1097/SCS.0000000000000602 DO - 10.1097/SCS.0000000000000602 ID - Han2014 ER - TY - JOUR AU - Haq, J. AU - Patel, N. AU - Weimer, K. AU - Matthews, N. S. PY - 2014 DA - 2014// TI - Single stage treatment of ankylosis of the temporomandibular joint using patient-specific total joint replacement and virtual surgical planning JO - Br J Oral Maxillofac Surg VL - 52 UR - https://doi.org/10.1016/j.bjoms.2014.01.004 DO - 10.1016/j.bjoms.2014.01.004 ID - Haq2014 ER - TY - JOUR AU - Inokoshi, M. AU - Kanazawa, M. AU - Minakuchi, S. PY - 2012 DA - 2012// TI - Evaluation of a complete denture trial method applying rapid prototyping JO - Dent Mater J VL - 31 UR - https://doi.org/10.4012/dmj.2011-113 DO - 10.4012/dmj.2011-113 ID - Inokoshi2012 ER - TY - JOUR AU - Katase, H. AU - Kanazawa, M. AU - Inokoshi, M. AU - Minakuchi, S. PY - 2013 DA - 2013// TI - Face simulation system for complete dentures by applying rapid prototyping JO - J Prosthet Dent VL - 109 UR - https://doi.org/10.1016/S0022-3913(13)60316-9 DO - 10.1016/S0022-3913(13)60316-9 ID - Katase2013 ER - TY - JOUR AU - Lethaus, B. AU - Bloebaum, M. AU - Essers, B. AU - Laak, M. P. AU - Steiner, T. AU - Kessler, P. PY - 2014 DA - 2014// TI - Patient-specific implants compared with stored bone grafts for patients with interval cranioplasty JO - J Cranio-Maxillofac Surg VL - 25 UR - https://doi.org/10.1097/SCS.0000000000000396 DO - 10.1097/SCS.0000000000000396 ID - Lethaus2014 ER - TY - JOUR AU - Lo, L. J. AU - Chen, Y. R. AU - Tseng, C. S. AU - Lee, M. Y. PY - 2004 DA - 2004// TI - Computer-aided reconstruction of traumatic fronto-orbital osseous defects: aesthetic considerations JO - Chang Gung Med J VL - 27 ID - Lo2004 ER - TY - JOUR AU - Mazzoni, S. AU - Bianchi, A. AU - Schiariti, G. AU - Badiali, G. AU - Marchetti, C. PY - 2015 DA - 2015// TI - Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning JO - J Oral Maxillofac Surg. VL - 73 UR - https://doi.org/10.1016/j.joms.2014.10.028 DO - 10.1016/j.joms.2014.10.028 ID - Mazzoni2015 ER - TY - JOUR AU - Rotaru, H. AU - Stan, H. AU - Florian, I. S. AU - Schumacher, R. AU - Park, Y. T. AU - Kim, S. G. PY - 2012 DA - 2012// TI - Cranioplasty with custom-made implants: analyzing the cases of 10 patients JO - J Oral Maxillofac Surg VL - 70 UR - https://doi.org/10.1016/j.joms.2011.09.036 DO - 10.1016/j.joms.2011.09.036 ID - Rotaru2012 ER - TY - JOUR AU - Saijo, H. AU - Igawa, K. AU - Kanno, Y. AU - Mori, Y. AU - Kondo, K. AU - Shimizu, K. PY - 2009 DA - 2009// TI - Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology JO - J Artif Org VL - 12 UR - https://doi.org/10.1007/s10047-009-0462-7 DO - 10.1007/s10047-009-0462-7 ID - Saijo2009 ER - TY - JOUR AU - Stoor, P. AU - Suomalainen, A. AU - Lindqvist, C. AU - Mesimäki, K. AU - Danielsson, D. AU - Westermark, A. PY - 2014 DA - 2014// TI - Rapid prototyped patient specific implants for reconstruction of orbital wall defects JO - J Cranio-Maxillofac Surg VL - 42 UR - https://doi.org/10.1016/j.jcms.2014.05.006 DO - 10.1016/j.jcms.2014.05.006 ID - Stoor2014 ER - TY - JOUR AU - Zhou, L. B. AU - Shang, H. T. AU - He, L. S. AU - Bo, B. AU - Liu, G. C. AU - Liu, Y. P. PY - 2010 DA - 2010// TI - Accurate reconstruction of discontinuous mandible using a reverse engineering/computer-aided design/rapid prototyping technique: a preliminary clinical study JO - J Oral Maxillofac Surg VL - 68 UR - https://doi.org/10.1016/j.joms.2009.09.033 DO - 10.1016/j.joms.2009.09.033 ID - Zhou2010 ER - TY - JOUR AU - Alonso-Rodriguez, E. AU - Cebrián, J. L. AU - Nieto, M. J. AU - Castillo, J. L. AU - Hernández-Godoy, J. AU - Burgueño, M. PY - 2015 DA - 2015// TI - Polyetheretherketone custom-made implants for craniofacial defects: report of 14 cases and review of the literature JO - J Cranio-Maxillofac Surg VL - 43 UR - https://doi.org/10.1016/j.jcms.2015.04.028 DO - 10.1016/j.jcms.2015.04.028 ID - Alonso-Rodriguez2015 ER - TY - JOUR AU - Baumann, A. AU - Sinko, K. AU - Dorner, G. PY - 2015 DA - 2015// TI - Late reconstruction of the orbit with patient-specific implants using computer-aided planning and navigation JO - J Oral Maxillofac Surg VL - 73 UR - https://doi.org/10.1016/j.joms.2015.06.149 DO - 10.1016/j.joms.2015.06.149 ID - Baumann2015 ER - TY - JOUR AU - Gerbino, G. AU - Zavattero, E. AU - Zenga, F. AU - Bianchi, F. A. AU - Garzino-Demo, P. AU - Berrone, S. PY - 2015 DA - 2015// TI - Primary and secondary reconstruction of complex craniofacial defects using polyetheretherketone custom-made implants JO - J Cranio-Maxillofac Surg VL - 43 UR - https://doi.org/10.1016/j.jcms.2015.06.043 DO - 10.1016/j.jcms.2015.06.043 ID - Gerbino2015 ER - TY - JOUR AU - Lethaus, B. AU - Bloebaum, M. AU - Koper, D. AU - Poort-Ter Laak, M. AU - Kessler, P. PY - 2014 DA - 2014// TI - Interval cranioplasty with patient-specific implants and autogenous bone grafts—success and cost analysis JO - J Cranio-Maxillofac Surg VL - 42 UR - https://doi.org/10.1016/j.jcms.2014.08.006 DO - 10.1016/j.jcms.2014.08.006 ID - Lethaus2014 ER - TY - JOUR AU - Manrique, O. J. AU - Lalezarzadeh, F. AU - Dayan, E. AU - Shin, J. AU - Buchbinder, D. AU - Smith, M. PY - 2015 DA - 2015// TI - Craniofacial reconstruction using patient-specific implants polyether ether ketone with computer-assisted planning JO - J Cranio-Maxillofac Surg VL - 26 UR - https://doi.org/10.1097/SCS.0000000000001443 DO - 10.1097/SCS.0000000000001443 ID - Manrique2015 ER - TY - JOUR AU - Mao, Y. AU - Xu, C. AU - Xu, J. AU - Li, H. AU - Liu, F. AU - Yu, D. PY - 2015 DA - 2015// TI - The use of customized cages in revision total hip arthroplasty for Paprosky type III acetabular bone defects JO - Int Orthop VL - 39 UR - https://doi.org/10.1007/s00264-015-2965-6 DO - 10.1007/s00264-015-2965-6 ID - Mao2015 ER - TY - JOUR AU - Ng, Z. Y. AU - Nawaz, I. PY - 2014 DA - 2014// TI - Computer-designed PEEK implants: a peek into the future of cranioplasty? JO - J Craniofac Surg VL - 25 UR - https://doi.org/10.1097/SCS.0b013e3182a2f7b6 DO - 10.1097/SCS.0b013e3182a2f7b6 ID - Ng2014 ER - TY - JOUR AU - Rammos, C. K. AU - Cayci, C. AU - Castro-Garcia, J. A. AU - Feiz-Erfan, I. AU - Lettieri, S. C. PY - 2015 DA - 2015// TI - Patient-specific polyetheretherketone implants for repair of craniofacial defects JO - J Craniofac Surg VL - 26 UR - https://doi.org/10.1097/SCS.0000000000001413 DO - 10.1097/SCS.0000000000001413 ID - Rammos2015 ER - TY - JOUR AU - Rana, M. AU - Chui, C. H. K. AU - Wagner, M. AU - Zimmerer, R. AU - Rana, M. AU - Gellrich, N. C. PY - 2015 DA - 2015// TI - Increasing the accuracy of orbital reconstruction with selective laser-melted patient-specific implants combined with intraoperative navigation JO - J Oral Maxillofac Surg VL - 73 UR - https://doi.org/10.1016/j.joms.2015.02.014 DO - 10.1016/j.joms.2015.02.014 ID - Rana2015 ER - TY - JOUR AU - Rosenthal, G. AU - Ng, I. AU - Moscovici, S. AU - Lee, K. K. AU - Lay, T. AU - Martin, C. PY - 2014 DA - 2014// TI - Polyetheretherketone implants for the repair of large cranial defects: a 3-center experience JO - Neurosurgery. VL - 75 UR - https://doi.org/10.1227/NEU.0000000000000477 DO - 10.1227/NEU.0000000000000477 ID - Rosenthal2014 ER - TY - STD TI - Schwarzkopf R, Brodsky M, Garcia GA, Gomoll AH. Surgical and functional outcomes in patients undergoing total knee replacement with patient-specific implants compared with “off-the-shelf” implants. orthopaedic J Sports Med. 2015;3(7). ID - ref30 ER - TY - JOUR AU - Wilde, F. AU - Hanken, H. AU - Probst, F. AU - Schramm, A. AU - Heiland, M. AU - Cornelius, C. P. PY - 2015 DA - 2015// TI - Multicenter study on the use of patient-specific CAD/CAM reconstruction plates for mandibular reconstruction JO - Int J Comput Assist Radiol Surg VL - 10 UR - https://doi.org/10.1007/s11548-015-1193-2 DO - 10.1007/s11548-015-1193-2 ID - Wilde2015 ER - TY - JOUR AU - Zhong, S. AU - Huang, G. J. AU - Susarla, S. M. AU - Swanson, E. W. AU - Huang, J. AU - Gordon, C. R. PY - 2015 DA - 2015// TI - Quantitative analysis of dual-purpose, patient-specific craniofacial implants for correction of temporal deformity JO - Neurosurgery. VL - 11 UR - https://doi.org/10.1227/NEU.0000000000000679 DO - 10.1227/NEU.0000000000000679 ID - Zhong2015 ER - TY - JOUR AU - Keller, E. E. AU - Baltali, E. AU - Liang, X. AU - Zhao, K. AU - Huebner, M. AU - An, K. N. PY - 2012 DA - 2012// TI - Temporomandibular custom hemijoint replacement prosthesis: prospective clinical and kinematic study JO - J Oral Maxillofac Surg VL - 70 UR - https://doi.org/10.1016/j.joms.2011.06.202 DO - 10.1016/j.joms.2011.06.202 ID - Keller2012 ER - TY - JOUR AU - Kozakiewicz, M. AU - Szymor, P. PY - 2013 DA - 2013// TI - Comparison of pre-bent titanium mesh versus polyethylene implants in patient specific orbital reconstructions JO - Head Face Med. VL - 9 UR - https://doi.org/10.1186/1746-160X-9-32 DO - 10.1186/1746-160X-9-32 ID - Kozakiewicz2013 ER - TY - JOUR AU - Azuma, M. AU - Yanagawa, T. AU - Ishibashi-Kanno, N. AU - Uchida, F. AU - Ito, T. AU - Yamagata, K. PY - 2014 DA - 2014// TI - Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity JO - Head Face Med. VL - 10 UR - https://doi.org/10.1186/1746-160X-10-45 DO - 10.1186/1746-160X-10-45 ID - Azuma2014 ER - TY - JOUR AU - Lim, C. G. T. AU - Campbell, D. I. AU - Cook, N. AU - Erasmus, J. PY - 2015 DA - 2015// TI - A case series of rapid prototyping and intraoperative imaging in orbital reconstruction JO - Craniomaxillofac Trauma Reconstr VL - 8 ID - Lim2015 ER - TY - JOUR AU - Park, S. W. AU - Choi, J. W. AU - Koh, K. S. AU - Oh, T. S. PY - 2015 DA - 2015// TI - Mirror-imaged rapid prototype skull model and pre-molded synthetic scaffold to achieve optimal orbital cavity reconstruction JO - J Oral Maxillofac Surg VL - 73 UR - https://doi.org/10.1016/j.joms.2015.03.025 DO - 10.1016/j.joms.2015.03.025 ID - Park2015 ER - TY - JOUR AU - Shengwei, H. AU - Zhiyong, W. AU - Qingang, H. AU - Wei, H. PY - 2014 DA - 2014// TI - Combined use of an anterolateral thigh flap and rapid prototype modeling to reconstruct maxillary oncologic resections and midface defects JO - J Craniofac Surg. VL - 25 UR - https://doi.org/10.1097/SCS.0000000000000602 DO - 10.1097/SCS.0000000000000602 ID - Shengwei2014 ER - TY - JOUR AU - Sieira Gil, R. AU - Mari Roig, A. AU - Arranz Obispo, C. AU - Morla, A. AU - Marti Pages, C. AU - Llopis, P. e. r. e. z. J. PY - 2015 DA - 2015// TI - Surgical planning and microvascular reconstruction of the mandible with a fibular flap using computer-aided design, rapid prototype modelling, and precontoured titanium reconstruction plates: a prospective study JO - Br J Oral Maxillofac Surg VL - 53 UR - https://doi.org/10.1016/j.bjoms.2014.09.015 DO - 10.1016/j.bjoms.2014.09.015 ID - Sieira Gil2015 ER - TY - JOUR AU - Yamada, H. AU - Nakaoka, K. AU - Horiuchi, T. AU - Kumagai, K. AU - Ikawa, T. AU - Shigeta, Y. PY - 2014 DA - 2014// TI - Mandibular reconstruction using custom-made titanium mesh tray and particulate cancellous bone and marrow harvested from bilateral posterior ilia JO - J Plast Surg Hand Surg. VL - 48 UR - https://doi.org/10.3109/2000656X.2013.848809 DO - 10.3109/2000656X.2013.848809 ID - Yamada2014 ER - TY - JOUR AU - Yim, H. W. AU - Anh, N. AU - Kim, Y. K. PY - 2015 DA - 2015// TI - Facial contouring surgery with custom silicone implants based on a 3D prototype model and ct-scan: a preliminary study JO - Aesthetic Plast Surg VL - 39 UR - https://doi.org/10.1007/s00266-015-0482-z DO - 10.1007/s00266-015-0482-z ID - Yim2015 ER - TY - JOUR AU - Schievano, S. AU - Sebire, N. J. AU - Robertson, N. J. AU - Taylor, A. M. AU - Thayyil, S. PY - 2010 DA - 2010// TI - Reconstruction of fetal and infant anatomy using rapid prototyping of post-mortem MR images JO - Insights Imaging. VL - 1 UR - https://doi.org/10.1007/s13244-010-0028-5 DO - 10.1007/s13244-010-0028-5 ID - Schievano2010 ER - TY - JOUR AU - Wilasrusmee, C. AU - Suvikrom, J. AU - Suthakorn, J. AU - Lertsithichai, P. AU - Sitthiseriprapip, K. AU - Proprom, N. PY - 2008 DA - 2008// TI - Three-dimensional aortic aneurysm model and endovascular repair: an educational tool for surgical trainees JO - Int J Angiol. VL - 17 UR - https://doi.org/10.1055/s-0031-1278295 DO - 10.1055/s-0031-1278295 ID - Wilasrusmee2008 ER - TY - JOUR AU - D’Urso, P. S. AU - Barker, T. M. AU - Earwaker, W. J. AU - Bruce, L. J. AU - Atkinson, R. L. AU - Lanigan, M. W. PY - 1999 DA - 1999// TI - Stereolithographic biomodelling in cranio-maxillofacial surgery: a prospective trial JO - J Cranio-maxillo-Fac Surg VL - 27 UR - https://doi.org/10.1016/S1010-5182(99)80007-9 DO - 10.1016/S1010-5182(99)80007-9 ID - D’Urso1999 ER - TY - JOUR AU - Muller, A. AU - Krishnan, K. G. AU - Uhl, E. AU - Mast, G. PY - 2003 DA - 2003// TI - The application of rapid prototyping techniques in cranial reconstruction and preoperative planning in neurosurgery JO - J CranioFac Surg VL - 14 UR - https://doi.org/10.1097/00001665-200311000-00014 DO - 10.1097/00001665-200311000-00014 ID - Muller2003 ER - TY - JOUR AU - Poukens, J. AU - Haex, J. AU - Riediger, D. PY - 2003 DA - 2003// TI - The use of rapid prototyping in the preoperative planning of distraction osteogenesis of the cranio-maxillofacial skeleton JO - Comput Aided Surg VL - 8 UR - https://doi.org/10.3109/10929080309146049 DO - 10.3109/10929080309146049 ID - Poukens2003 ER - TY - JOUR AU - Lee, S. J. PY - 2004 DA - 2004// TI - Clinical application of computer-aided rapid prototyping for tooth transplantation JO - Aust Endod J. VL - 30 UR - https://doi.org/10.1111/j.1747-4477.2004.tb00166.x DO - 10.1111/j.1747-4477.2004.tb00166.x ID - Lee2004 ER - TY - JOUR AU - D’Urso, P. S. AU - Williamson, O. D. AU - Thompson, R. G. PY - 2005 DA - 2005// TI - Biomodeling as an aid to spinal instrumentation JO - Spine. VL - 30 UR - https://doi.org/10.1097/01.brs.0000190886.56895.3d DO - 10.1097/01.brs.0000190886.56895.3d ID - D’Urso2005 ER - TY - JOUR AU - Ngan, E. M. AU - Rebeyka, I. M. AU - Ross, D. B. AU - Hirji, M. AU - Wolfaardt, J. F. AU - Seelaus, R. PY - 2006 DA - 2006// TI - The rapid prototyping of anatomic models in pulmonary atresia JO - J Thorac Cardiovasc Surg VL - 132 UR - https://doi.org/10.1016/j.jtcvs.2006.02.047 DO - 10.1016/j.jtcvs.2006.02.047 ID - Ngan2006 ER - TY - JOUR AU - Curcio, R. AU - Perin, G. L. AU - Chilvarquer, I. AU - Borri, M. L. AU - Ajzen, S. PY - 2007 DA - 2007// TI - Use of models in surgical predictability of oral rehabilitations JO - Acta Cirurgica Brasileira. VL - 22 UR - https://doi.org/10.1590/S0102-86502007000500011 DO - 10.1590/S0102-86502007000500011 ID - Curcio2007 ER - TY - JOUR AU - Dai, K. R. AU - Yan, M. N. AU - Zhu, Z. A. AU - Sun, Y. H. PY - 2007 DA - 2007// TI - Computer-aided custom-made hemipelvic prosthesis used in extensive pelvic lesions JO - J Arthroplasty VL - 22 UR - https://doi.org/10.1016/j.arth.2007.05.002 DO - 10.1016/j.arth.2007.05.002 ID - Dai2007 ER - TY - JOUR AU - Fan, X. AU - Zhou, H. AU - Lin, M. AU - Fu, Y. AU - Li, J. PY - 2007 DA - 2007// TI - Late reconstruction of the complex orbital fractures with computer-aided design and computer-aided manufacturing technique JO - J Craniofac Surg VL - 18 UR - https://doi.org/10.1097/scs.0b013e31803ffaaa DO - 10.1097/scs.0b013e31803ffaaa ID - Fan2007 ER - TY - JOUR AU - Guarino, J. AU - Tennyson, S. AU - McCain, G. AU - Bond, L. AU - Shea, K. AU - King, H. PY - 2007 DA - 2007// TI - Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis JO - J Pediatr Orthop VL - 27 UR - https://doi.org/10.1097/bpo.0b013e3181594ced DO - 10.1097/bpo.0b013e3181594ced ID - Guarino2007 ER - TY - JOUR AU - Hurson, C. AU - Tansey, A. AU - O’Donnchadha, B. AU - Nicholson, P. AU - Rice, J. AU - McElwain, J. PY - 2007 DA - 2007// TI - Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures JO - Injury. VL - 38 UR - https://doi.org/10.1016/j.injury.2007.05.020 DO - 10.1016/j.injury.2007.05.020 ID - Hurson2007 ER - TY - JOUR AU - Mavili, M. E. AU - Canter, H. I. AU - Saglam-Aydinatay, B. AU - Kamaci, S. AU - Kocadereli, I. PY - 2007 DA - 2007// TI - Use of three-dimensional medical modeling methods for precise planning of orthognathic surgery JO - J Craniofac Surg VL - 18 UR - https://doi.org/10.1097/scs.0b013e318069014f DO - 10.1097/scs.0b013e318069014f ID - Mavili2007 ER - TY - JOUR AU - Schievano, S. AU - Migliavacca, F. AU - Coats, L. AU - Khambadkone, S. AU - Carminati, M. AU - Wilson, N. PY - 2007 DA - 2007// TI - Percutaneous pulmonary valve implantation based on rapid prototyping of right ventricular outflow tract and pulmonary trunk from MR data JO - Radiology VL - 242 UR - https://doi.org/10.1148/radiol.2422051994 DO - 10.1148/radiol.2422051994 ID - Schievano2007 ER - TY - JOUR AU - Mizutani, J. AU - Matsubara, T. AU - Fukuoka, M. AU - Tanaka, N. AU - Iguchi, H. AU - Furuya, A. PY - 2008 DA - 2008// TI - Application of full-scale three-dimensional models in patients with rheumatoid cervical spine JO - Eur Spine J VL - 17 UR - https://doi.org/10.1007/s00586-008-0611-3 DO - 10.1007/s00586-008-0611-3 ID - Mizutani2008 ER - TY - JOUR AU - Kozakiewicz, M. AU - Elgalal, M. AU - Loba, P. AU - Komunski, P. AU - Arkuszewski, P. AU - Broniarczyk-Loba, A. PY - 2009 DA - 2009// TI - Clinical application of 3D pre-bent titanium implants for orbital floor fractures JO - J Cranio-Maxillofac Surg VL - 37 UR - https://doi.org/10.1016/j.jcms.2008.11.009 DO - 10.1016/j.jcms.2008.11.009 ID - Kozakiewicz2009 ER - TY - JOUR AU - Lu, S. AU - Xu, Y. Q. AU - Lu, W. W. AU - Ni, G. X. AU - Li, Y. B. AU - Shi, J. H. PY - 2009 DA - 2009// TI - A novel patient-specific navigational template for cervical pedicle screw placement JO - Spine. VL - 34 UR - https://doi.org/10.1097/BRS.0b013e3181c09985 DO - 10.1097/BRS.0b013e3181c09985 ID - Lu2009 ER - TY - JOUR AU - Lu, S. AU - Xu, Y. Q. AU - Zhang, Y. Z. AU - Xie, L. AU - Guo, H. AU - Li, D. P. PY - 2009 DA - 2009// TI - A novel computer-assisted drill guide template for placement of C2 laminar screws JO - Eur Spine J VL - 18 UR - https://doi.org/10.1007/s00586-009-1051-4 DO - 10.1007/s00586-009-1051-4 ID - Lu2009 ER - TY - JOUR AU - Riesenkampff, E. AU - Rietdorf, U. AU - Wolf, I. AU - Schnackenburg, B. AU - Ewert, P. AU - Huebler, M. PY - 2009 DA - 2009// TI - The practical clinical value of three-dimensional models of complex congenitally malformed hearts JO - J Thorac Cardiovasc Surg VL - 138 UR - https://doi.org/10.1016/j.jtcvs.2009.03.011 DO - 10.1016/j.jtcvs.2009.03.011 ID - Riesenkampff2009 ER - TY - JOUR AU - Kunz, M. AU - Rudan, J. F. AU - Xenoyannis, G. L. AU - Ellis, R. E. PY - 2010 DA - 2010// TI - Computer-assisted hip resurfacing using individualized drill templates JO - J Arthroplasty VL - 25 UR - https://doi.org/10.1016/j.arth.2009.03.023 DO - 10.1016/j.arth.2009.03.023 ID - Kunz2010 ER - TY - JOUR AU - Mao, K. Y. AU - Wang, Y. AU - Xiao, S. H. AU - Liu, Z. S. AU - Zhang, Y. G. AU - Zhang, X. S. PY - 2010 DA - 2010// TI - Clinical application of computer-designed polystyrene models in complex severe spinal deformities: a pilot study JO - Eur Spine J VL - 19 UR - https://doi.org/10.1007/s00586-010-1359-0 DO - 10.1007/s00586-010-1359-0 ID - Mao2010 ER - TY - JOUR AU - Ping, F. Y. AU - Liu, W. AU - Chen, F. AU - Xu, X. AU - Shi, Z. J. AU - Yan, F. G. PY - 2010 DA - 2010// TI - Simultaneous correction of bilateral temporomandibular joint ankylosis with mandibular micrognathia using internal distraction osteogenesis and 3-dimensional craniomaxillofacial models JO - J Oral Maxillofac Surg VL - 68 UR - https://doi.org/10.1016/j.joms.2009.07.022 DO - 10.1016/j.joms.2009.07.022 ID - Ping2010 ER - TY - JOUR AU - Tang, W. AU - Guo, L. J. AU - Long, J. AU - Wang, H. AU - Lin, Y. F. AU - Liu, L. PY - 2010 DA - 2010// TI - Individual design and rapid prototyping in reconstruction of orbital wall defects JO - J Oral Maxillofac Surg VL - 68 UR - https://doi.org/10.1016/j.joms.2009.04.042 DO - 10.1016/j.joms.2009.04.042 ID - Tang2010 ER - TY - JOUR AU - Chai, G. AU - Zhang, Y. AU - Ma, X. AU - Zhu, M. AU - Yu, Z. AU - Mu, X. PY - 2011 DA - 2011// TI - Reconstruction of fronto-orbital and nasal defects with compound epoxied maleic acrylate/hydroxyapatite implant prefabricated with a computer design program JO - Ann Plast Surg VL - 67 UR - https://doi.org/10.1097/SAP.0b013e318201fddf DO - 10.1097/SAP.0b013e318201fddf ID - Chai2011 ER - TY - JOUR AU - Daniel, M. AU - Watson, J. AU - Hoskison, E. AU - Sama, A. PY - 2011 DA - 2011// TI - Frontal sinus models and onlay templates in osteoplastic flap surgery JO - J Laryngol Otol VL - 125 UR - https://doi.org/10.1017/S0022215110001799 DO - 10.1017/S0022215110001799 ID - Daniel2011 ER - TY - JOUR AU - Feng, F. AU - Wang, H. AU - Guan, X. G. AU - Tian, W. D. AU - Jing, W. AU - Long, J. PY - 2011 DA - 2011// TI - Mirror imaging and preshaped titanium plates in the treatment of unilateral malar and zygomatic arch fractures JO - Oral Surg Oral Med Oral Pathol Oral Radiol Endodontol VL - 112 UR - https://doi.org/10.1016/j.tripleo.2010.10.014 DO - 10.1016/j.tripleo.2010.10.014 ID - Feng2011 ER - TY - JOUR AU - Kim, B. C. AU - Lee, C. E. AU - Park, W. AU - Kim, M. K. AU - Zhengguo, P. AU - Yu, H. S. PY - 2011 DA - 2011// TI - Clinical experiences of digital model surgery and the rapid-prototyped wafer for maxillary orthognathic surgery JO - Oral Surg Oral Med Oral Pathol Oral Radiol Endod. VL - 111 UR - https://doi.org/10.1016/j.tripleo.2010.04.038 DO - 10.1016/j.tripleo.2010.04.038 ID - Kim2011 ER - TY - JOUR AU - Kozakiewicz, M. AU - Elgalal, M. AU - Piotr, L. AU - Broniarczyk-Loba, A. AU - Stefanczyk, L. PY - 2011 DA - 2011// TI - Treatment with individual orbital wall implants in humans-1-year ophthalmologic evaluation JO - J Cranio-Maxillofac Surg VL - 39 UR - https://doi.org/10.1016/j.jcms.2010.03.007 DO - 10.1016/j.jcms.2010.03.007 ID - Kozakiewicz2011 ER - TY - JOUR AU - Yang, J. C. AU - Ma, X. Y. AU - Lin, J. AU - Wu, Z. H. AU - Zhang, K. AU - Yin, Q. S. PY - 2011 DA - 2011// TI - Personalised modified osteotomy using computer-aided design-rapid prototyping to correct thoracic deformities JO - Int Orthop VL - 35 UR - https://doi.org/10.1007/s00264-010-1155-9 DO - 10.1007/s00264-010-1155-9 ID - Yang2011 ER - TY - JOUR AU - Zhang, S. Y. AU - Liu, X. M. AU - Xu, Y. J. AU - Yang, C. AU - Undt, G. AU - Chen, M. J. PY - 2011 DA - 2011// TI - Application of Rapid Prototyping for Temporomandibular Joint Reconstruction JO - J Oral Maxillofac Surg VL - 69 UR - https://doi.org/10.1016/j.joms.2010.05.081 DO - 10.1016/j.joms.2010.05.081 ID - Zhang2011 ER - TY - JOUR AU - Zhang, Y. A. Z. AU - Lu, S. AU - Chen, B. AU - Zhao, J. A. M. AU - Liu, R. AU - Pei, G. X. PY - 2011 DA - 2011// TI - Application of computer-aided design osteotomy template for treatment of cubitus varus deformity in teenagers: a pilot study JO - J Shoulder Elbow Surg VL - 20 UR - https://doi.org/10.1016/j.jse.2010.08.029 DO - 10.1016/j.jse.2010.08.029 ID - Zhang2011 ER - TY - JOUR AU - Zhang, Y. Z. AU - Chen, B. AU - Lu, S. AU - Yang, Y. AU - Zhao, J. M. AU - Liu, R. PY - 2011 DA - 2011// TI - Preliminary application of computer-assisted patient-specific acetabular navigational template for total hip arthroplasty in adult single development dysplasia of the hip JO - Int J Med Robot VL - 7 UR - https://doi.org/10.1002/rcs.423 DO - 10.1002/rcs.423 ID - Zhang2011 ER - TY - JOUR AU - Gong, X. AU - Yu, Q. PY - 2012 DA - 2012// TI - Correction of maxillary deformity in infants with bilateral cleft lip and palate using computer-assisted design JO - Oral Surg Oral Med Oral Pathol Oral Radiol. VL - 114 UR - https://doi.org/10.1016/j.tripleo.2011.08.031 DO - 10.1016/j.tripleo.2011.08.031 ID - Gong2012 ER - TY - JOUR AU - Kawaguchi, Y. AU - Nakano, M. AU - Yasuda, T. AU - Seki, S. AU - Hori, T. AU - Kimura, T. PY - 2012 DA - 2012// TI - Development of a new technique for pedicle screw and magerl screw insertion using a 3-dimensional image guide JO - Spine. VL - 37 UR - https://doi.org/10.1097/BRS.0b013e31825ab547 DO - 10.1097/BRS.0b013e31825ab547 ID - Kawaguchi2012 ER - TY - JOUR AU - Lee, S. J. AU - Kim, E. PY - 2012 DA - 2012// TI - Minimizing the extra-oral time in autogeneous tooth transplantation: use of computer-aided rapid prototyping (CARP) as a duplicate model tooth JO - Restor Dent Endod. VL - 37 UR - https://doi.org/10.5395/rde.2012.37.3.136 DO - 10.5395/rde.2012.37.3.136 ID - Lee2012 ER - TY - JOUR AU - Lethaus, B. AU - Poort, L. AU - Bockmann, R. AU - Smeets, R. AU - Tolba, R. AU - Kessler, P. PY - 2012 DA - 2012// TI - Additive manufacturing for microvascular reconstruction of the mandible in 20 patients JO - J Cranio-Maxillofac Surg VL - 40 UR - https://doi.org/10.1016/j.jcms.2011.01.007 DO - 10.1016/j.jcms.2011.01.007 ID - Lethaus2012 ER - TY - JOUR AU - Lu, S. AU - Zhang, Y. Z. AU - Wang, Z. AU - Shi, J. H. AU - Chen, Y. B. AU - Xu, X. M. PY - 2012 DA - 2012// TI - Accuracy and efficacy of thoracic pedicle screws in scoliosis with patient-specific drill template JO - Med Biol Eng Comput VL - 50 UR - https://doi.org/10.1007/s11517-012-0900-1 DO - 10.1007/s11517-012-0900-1 ID - Lu2012 ER - TY - JOUR AU - Modabber, A. AU - Gerressen, M. AU - Stiller, M. B. AU - Noroozi, N. AU - Fuglein, A. AU - Holzle, F. PY - 2012 DA - 2012// TI - Computer-assisted mandibular reconstruction with vascularized iliac crest bone graft JO - Aesthetic Plast Surg VL - 36 UR - https://doi.org/10.1007/s00266-012-9877-2 DO - 10.1007/s00266-012-9877-2 ID - Modabber2012 ER - TY - JOUR AU - Modabber, A. AU - Legros, C. AU - Rana, M. AU - Gerressen, M. AU - Riediger, D. AU - Ghassemi, A. PY - 2012 DA - 2012// TI - Evaluation of computer-assisted jaw reconstruction with free vascularized fibular flap compared to conventional surgery: a clinical pilot study JO - Int J Med Robot VL - 8 UR - https://doi.org/10.1002/rcs.456 DO - 10.1002/rcs.456 ID - Modabber2012 ER - TY - JOUR AU - Adolphs, N. AU - Liu, W. C. AU - Keeve, E. AU - Hoffmeister, B. PY - 2013 DA - 2013// TI - Craniomaxillofacial surgery planning based on 3D models derived from Cone-Beam CT data JO - Comput Aided Surg VL - 18 UR - https://doi.org/10.3109/10929088.2013.796002 DO - 10.3109/10929088.2013.796002 ID - Adolphs2013 ER - TY - JOUR AU - Du, H. AU - Tian, X. X. AU - Li, T. S. AU - Yang, J. S. AU - Li, K. H. AU - Pei, G. X. PY - 2013 DA - 2013// TI - Use of patient-specific templates in hip resurfacing arthroplasty: experience from sixteen cases JO - Int Orthop VL - 37 UR - https://doi.org/10.1007/s00264-013-1842-4 DO - 10.1007/s00264-013-1842-4 ID - Du2013 ER - TY - JOUR AU - Hanasono, M. M. AU - Skoracki, R. J. PY - 2013 DA - 2013// TI - Computer-assisted design and rapid prototype modeling in microvascular mandible reconstruction JO - Laryngoscope. VL - 123 UR - https://doi.org/10.1002/lary.23717 DO - 10.1002/lary.23717 ID - Hanasono2013 ER - TY - JOUR AU - Jang, J. H. AU - Lee, S. J. AU - Kim, E. PY - 2013 DA - 2013// TI - Autotransplantation of immature third molars using a computer-aided rapid prototyping model: a report of 4 cases JO - J Endod VL - 39 UR - https://doi.org/10.1016/j.joen.2013.06.026 DO - 10.1016/j.joen.2013.06.026 ID - Jang2013 ER - TY - JOUR AU - Li, B. AU - Zhang, L. AU - Sun, H. AU - Yuan, J. B. AU - Shen, S. G. F. AU - Wang, X. D. PY - 2013 DA - 2013// TI - A novel method of computer aided orthognathic surgery using individual CAD/CAM templates: a combination of osteotomy and repositioning guides JO - Br J Oral Maxillofac Surg VL - 51 UR - https://doi.org/10.1016/j.bjoms.2013.03.007 DO - 10.1016/j.bjoms.2013.03.007 ID - Li2013 ER - TY - JOUR AU - Li, H. AU - Wang, L. AU - Mao, Y. AU - Wang, Y. AU - Dai, K. AU - Zhu, Z. PY - 2013 DA - 2013// TI - Revision of complex acetabular defects using cages with the aid of rapid prototyping JO - J Arthroplasty VL - 28 UR - https://doi.org/10.1016/j.arth.2012.12.019 DO - 10.1016/j.arth.2012.12.019 ID - Li2013 ER - TY - JOUR AU - Li, J. AU - Li, P. AU - Lu, H. L. AU - Shen, L. D. AU - Tian, W. D. AU - Long, J. PY - 2013 DA - 2013// TI - Digital Design and Individually Fabricated Titanium Implants for the Reconstruction of Traumatic Zygomatico-Orbital Defects JO - J Craniofac Surg VL - 24 UR - https://doi.org/10.1097/SCS.0b013e3182701243 DO - 10.1097/SCS.0b013e3182701243 ID - Li2013 ER - TY - JOUR AU - Otsuki, B. AU - Takemoto, M. AU - Kawanabe, K. AU - Awa, Y. AU - Akiyama, H. AU - Fujibayashi, S. PY - 2013 DA - 2013// TI - Developing a novel custom cutting guide for curved peri-acetabular osteotomy JO - Int Orthop VL - 37 UR - https://doi.org/10.1007/s00264-013-1873-x DO - 10.1007/s00264-013-1873-x ID - Otsuki2013 ER - TY - JOUR AU - Parchi, P. D. AU - Ferrari, V. AU - Piolanti, N. AU - Andreani, L. AU - Condino, S. AU - Evangelisti, G. PY - 2013 DA - 2013// TI - Computer tomography prototyping and virtual procedure simulation in difficult cases of hip replacement surgery JO - Surg Technol Int. VL - 23 ID - Parchi2013 ER - TY - JOUR AU - Pepper, J. AU - Petrou, M. AU - Rega, F. AU - Rosendahl, U. AU - Golesworthy, T. AU - Treasure, T. PY - 2013 DA - 2013// TI - Implantation of an individually computer-designed and manufactured external support for the Marfan aortic root JO - Multimed Man. VL - 2013 ID - Pepper2013 ER - TY - JOUR AU - Shehab, M. F. AU - Barakat, A. A. AU - Abdelghany, K. AU - Mostafa, Y. AU - Baur, D. A. PY - 2013 DA - 2013// TI - A novel design of a computer-generated splint for vertical repositioning of the maxilla after le Fort i osteotomy JO - Oral Surg Oral Med Oral Pathol Oral Radiol VL - 115 UR - https://doi.org/10.1016/j.oooo.2011.09.035 DO - 10.1016/j.oooo.2011.09.035 ID - Shehab2013 ER - TY - JOUR AU - Wang, J. AU - Liu, J. F. AU - Liu, W. AU - Wang, J. C. AU - Wang, S. Y. AU - Gui, L. PY - 2013 DA - 2013// TI - Application of computer techniques in repair of oblique facial clefts with outer-table calvarial bone grafts JO - J Craniofac Surg VL - 24 UR - https://doi.org/10.1097/SCS.0b013e31828691e6 DO - 10.1097/SCS.0b013e31828691e6 ID - Wang2013 ER - TY - JOUR AU - Wang, W. H. AU - Zhu, J. AU - Deng, J. Y. AU - Xia, B. AU - Xu, B. PY - 2013 DA - 2013// TI - Three-dimensional virtual technology in reconstruction of mandibular defect including condyle using double-barrel vascularized fibula flap JO - J Cranio-Maxillofac Surg VL - 41 UR - https://doi.org/10.1016/j.jcms.2012.11.008 DO - 10.1016/j.jcms.2012.11.008 ID - Wang2013 ER - TY - JOUR AU - Won, S. H. AU - Lee, Y. K. AU - Ha, Y. C. AU - Suh, Y. S. AU - Koo, K. H. PY - 2013 DA - 2013// TI - Improving pre-operative planning for complex total hip replacement with a rapid prototype model enabling surgical simulation JO - Bone Joint J. VL - 95B UR - https://doi.org/10.1302/0301-620X.95B11.31878 DO - 10.1302/0301-620X.95B11.31878 ID - Won2013 ER - TY - JOUR AU - Abdel-Moniem Barakat, A. AU - Abou-Elfetouh, A. AU - Hakam, M. M. AU - El-Hawary, H. AU - Abdel-Ghany, K. M. PY - 2014 DA - 2014// TI - Clinical and radiographic evaluation of a computer-generated guiding device in bilateral sagittal split osteotomies JO - J Cranio-Maxillofac Surg VL - 42 UR - https://doi.org/10.1016/j.jcms.2013.08.007 DO - 10.1016/j.jcms.2013.08.007 ID - Abdel-Moniem Barakat2014 ER - TY - JOUR AU - Ayoub, N. AU - Ghassemi, A. AU - Rana, M. AU - Gerressen, M. AU - Riediger, D. AU - Holzle, F. PY - 2014 DA - 2014// TI - Evaluation of computer-assisted mandibular reconstruction with vascularized iliac crest bone graft compared to conventional surgery: a randomized prospective clinical trial JO - Trials. VL - 15 UR - https://doi.org/10.1186/1745-6215-15-114 DO - 10.1186/1745-6215-15-114 ID - Ayoub2014 ER - TY - JOUR AU - Balanescu, B. AU - Franklin, R. AU - Ciurea, J. AU - Mindruta, I. AU - Rasina, A. AU - Bobulescu, R. C. PY - 2014 DA - 2014// TI - A personalized stereotactic fixture for implantation of depth electrodes in stereoelectroencephalography JO - Stereotact Funct Neurosurg VL - 92 UR - https://doi.org/10.1159/000360226 DO - 10.1159/000360226 ID - Balanescu2014 ER - TY - JOUR AU - Farias, T. P. AU - Dias, F. L. AU - Galvao, M. S. AU - Boasquevisque, E. AU - Pastl, A. C. AU - Sousa, B. A. PY - 2014 DA - 2014// TI - Use of prototyping in preoperative planning for patients with head and neck tumors JO - Head Neck VL - 36 UR - https://doi.org/10.1002/hed.23540 DO - 10.1002/hed.23540 ID - Farias2014 ER - TY - JOUR AU - Jiao, T. AU - Zhu, C. AU - Dong, X. AU - Gu, X. PY - 2014 DA - 2014// TI - Rehabilitation of maxillectomy defects with obturator prostheses fabricated using computer-aided design and rapid prototyping: a pilot study JO - Int J Prosthodont VL - 27 UR - https://doi.org/10.11607/ijp.3733 DO - 10.11607/ijp.3733 ID - Jiao2014 ER - TY - JOUR AU - Lin, X. AU - Ai, F. Z. AU - Yin, Q. S. AU - Xia, H. AU - Wu, Z. H. AU - Ma, X. Y. PY - 2014 DA - 2014// TI - Application of three-dimensional model in the management of irreducible atlanto-axial dislocation JO - Acta Orthop Traumatol Turc. VL - 48 UR - https://doi.org/10.3944/AOTT.2014.13.0005 DO - 10.3944/AOTT.2014.13.0005 ID - Lin2014 ER - TY - JOUR AU - Mashiko, T. AU - Otani, K. AU - Kawano, R. AU - Konno, T. AU - Kaneko, N. AU - Ito, Y. PY - 2014 DA - 2014// TI - Development of three-dimensional hollow elastic model for cerebral aneurysm clipping simulation enabling rapid and low cost prototyping JO - World Neurosurg. VL - 83 UR - https://doi.org/10.1016/j.wneu.2013.10.032 DO - 10.1016/j.wneu.2013.10.032 ID - Mashiko2014 ER - TY - JOUR AU - Prisman, E. AU - Haerle, S. K. AU - Irish, J. C. AU - Daly, M. AU - Miles, B. AU - Chan, H. PY - 2014 DA - 2014// TI - Value of preoperative mandibular plating in reconstruction of the mandible JO - Head Neck VL - 36 UR - https://doi.org/10.1002/hed.23382 DO - 10.1002/hed.23382 ID - Prisman2014 ER - TY - JOUR AU - Silberstein, J. L. AU - Maddox, M. M. AU - Dorsey, P. AU - Feibus, A. AU - Thomas, R. AU - Lee, B. R. PY - 2014 DA - 2014// TI - Physical models of renal malignancies using standard cross-sectional imaging and 3-dimensional printers: a pilot study JO - Urology. VL - 84 UR - https://doi.org/10.1016/j.urology.2014.03.042 DO - 10.1016/j.urology.2014.03.042 ID - Silberstein2014 ER - TY - JOUR AU - Treasure, T. AU - Takkenberg, J. J. M. AU - Golesworthy, T. AU - Rega, F. AU - Petrou, M. AU - Rosendahl, U. PY - 2014 DA - 2014// TI - Personalised external aortic root support (PEARS) in Marfan syndrome: analysis of 1-9 year outcomes by intention-to-treat in a cohort of the first 30 consecutive patients to receive a novel tissue and valve-conserving procedure, compared with the published results of aortic root replacement JO - Heart VL - 100 UR - https://doi.org/10.1136/heartjnl-2013-304913 DO - 10.1136/heartjnl-2013-304913 ID - Treasure2014 ER - TY - JOUR AU - Wilde, F. AU - Winter, K. AU - Kletsch, K. AU - Lorenz, K. AU - Schramm, A. PY - 2014 DA - 2014// TI - Mandible reconstruction using patient-specific pre-bent reconstruction plates: comparison of standard and transfer key methods JO - Int J Comput Assist Radiol Surg VL - 10 UR - https://doi.org/10.1007/s11548-014-1065-1 DO - 10.1007/s11548-014-1065-1 ID - Wilde2014 ER - TY - JOUR AU - Yang, J. C. AU - Ma, X. Y. AU - Xia, H. AU - Wu, Z. H. AU - Ai, F. Z. AU - Zhang, K. PY - 2014 DA - 2014// TI - Clinical application of computer-aided design-rapid prototyping in C1-C2 operation techniques for complex atlantoaxial instability JO - J Spinal Disord Tech VL - 27 ID - Yang2014 ER - TY - JOUR AU - Ciocca, L. AU - Marchetti, C. AU - Mazzoni, S. AU - Baldissara, P. AU - Gatto, M. R. A. AU - Cipriani, R. PY - 2015 DA - 2015// TI - Accuracy of fibular sectioning and insertion into a rapid-prototyped bone plate, for mandibular reconstruction using CAD–CAM technology JO - J Cranio-Maxillofac Surg VL - 43 UR - https://doi.org/10.1016/j.jcms.2014.10.005 DO - 10.1016/j.jcms.2014.10.005 ID - Ciocca2015 ER - TY - JOUR AU - Huang, H. AU - Hsieh, M. F. AU - Zhang, G. AU - Ouyang, H. AU - Zeng, C. AU - Yan, B. PY - 2015 DA - 2015// TI - Improved accuracy of 3D-printed navigational template during complicated tibial plateau fracture surgery JO - Aust Phys Eng Sci Med. VL - 38 UR - https://doi.org/10.1007/s13246-015-0330-0 DO - 10.1007/s13246-015-0330-0 ID - Huang2015 ER - TY - JOUR AU - Wu, X. B. AU - Wang, J. Q. AU - Zhao, C. P. AU - Sun, X. AU - Shi, Y. AU - Zhang, Z. A. PY - 2015 DA - 2015// TI - Printed three-dimensional anatomic templates for virtual preoperative planning before reconstruction of old pelvic injuries: initial results JO - Chin Med J VL - 128 UR - https://doi.org/10.4103/0366-6999.151085 DO - 10.4103/0366-6999.151085 ID - Wu2015 ER - TY - STD TI - Bauer AS, Storelli DA, Sibbel SE, McCarroll HR, Lattanza LL. Preoperative computer simulation and patient-specific guides are safe and effective to correct forearm deformity in children. J Pediatr Orthop. 2015. ID - ref111 ER - TY - JOUR AU - Chen, Y. AU - Niu, F. AU - Yu, B. AU - Liu, J. AU - Wang, M. AU - Gui, L. PY - 2014 DA - 2014// TI - Three-dimensional preoperative design of distraction osteogenesis for hemifacial microsomia JO - J Craniofac Surg VL - 25 UR - https://doi.org/10.1097/SCS.0000000000000391 DO - 10.1097/SCS.0000000000000391 ID - Chen2014 ER - TY - JOUR AU - Iannotti, J. P. AU - Weiner, S. AU - Rodriguez, E. AU - Subhas, N. AU - Patterson, T. E. AU - Jun, B. J. PY - 2015 DA - 2015// TI - Three-dimensional imaging and templating improve glenoid implant positioning JO - J Bone Joint Surg VL - 97 UR - https://doi.org/10.2106/JBJS.N.00493 DO - 10.2106/JBJS.N.00493 ID - Iannotti2015 ER - TY - JOUR AU - Kim, H. N. AU - Liu, X. N. AU - Noh, K. C. PY - 2015 DA - 2015// TI - Use of a real-size 3D-printed model as a preoperative and intraoperative tool for minimally invasive plating of comminuted midshaft clavicle fractures JO - J Orthop Surg Res. VL - 10 UR - https://doi.org/10.1186/s13018-014-0138-8 DO - 10.1186/s13018-014-0138-8 ID - Kim2015 ER - TY - JOUR AU - Schmauss, D. AU - Haeberle, S. AU - Hagl, C. AU - Sodian, R. PY - 2014 DA - 2014// TI - Three-dimensional printing in cardiac surgery and interventional cardiology: a single-centre experience JO - Eur J Cardiothorac Surg VL - 47 UR - https://doi.org/10.1093/ejcts/ezu310 DO - 10.1093/ejcts/ezu310 ID - Schmauss2014 ER - TY - JOUR AU - Tan, H. AU - Yang, K. AU - Wei, P. AU - Zhang, G. AU - Dimitriou, D. AU - Xu, L. PY - 2015 DA - 2015// TI - A novel preoperative planning technique using a combination of CT angiography and three-dimensional printing for complex toe-to-hand reconstruction JO - J Reconstr Microsurg VL - 31 UR - https://doi.org/10.1055/s-0035-1546419 DO - 10.1055/s-0035-1546419 ID - Tan2015 ER - TY - JOUR AU - Weinstock, P. AU - Prabhu, S. P. AU - Flynn, K. AU - Orbach, D. B. AU - Smith, E. PY - 2015 DA - 2015// TI - Optimizing cerebrovascular surgical and endovascular procedures in children via personalized 3D printing JO - J Neurosurg-Pediatr. VL - 16 UR - https://doi.org/10.3171/2015.3.PEDS14677 DO - 10.3171/2015.3.PEDS14677 ID - Weinstock2015 ER - TY - JOUR AU - Xu, H. AU - Zhang, C. AU - Shim, Y. H. AU - Li, H. AU - Cao, D. PY - 2015 DA - 2015// TI - Combined use of rapid-prototyping model and surgical guide in correction of mandibular asymmetry malformation patients with normal occlusal relationship JO - J Craniofac Surg. VL - 26 UR - https://doi.org/10.1097/SCS.0000000000001528 DO - 10.1097/SCS.0000000000001528 ID - Xu2015 ER - TY - JOUR AU - Xu, J. AU - Li, D. AU - Ma, R. F. AU - Barden, B. AU - Ding, Y. PY - 2015 DA - 2015// TI - Application of rapid prototyping pelvic model for patients with DDH to facilitate arthroplasty planning: a pilot study JO - J Arthroplasty VL - 30 UR - https://doi.org/10.1016/j.arth.2015.05.033 DO - 10.1016/j.arth.2015.05.033 ID - Xu2015 ER - TY - JOUR AU - Yang, M. AU - Li, C. AU - Li, Y. AU - Zhao, Y. AU - Wei, X. AU - Zhang, G. PY - 2015 DA - 2015// TI - Application of 3D rapid prototyping technology in posterior corrective surgery for Lenke 1 adolescent idiopathic scoliosis patients JO - Medicine (United States). VL - 94 ID - Yang2015 ER - TY - JOUR AU - Zeng, C. AU - Xiao, J. AU - Wu, Z. AU - Huang, W. PY - 2015 DA - 2015// TI - Evaluation of three-dimensional printing for internal fixation of unstable pelvic fracture from minimal invasive para-rectus abdominis approach: a preliminary report JO - Int J Clin Exp Med VL - 8 ID - Zeng2015 ER - TY - JOUR AU - Li, M. AU - Lin, X. AU - Xu, Y. PY - 2010 DA - 2010// TI - The application of rapid prototyping technique in chin augmentation JO - Aesthet Plast Surg VL - 34 UR - https://doi.org/10.1007/s00266-009-9397-x DO - 10.1007/s00266-009-9397-x ID - Li2010 ER - TY - JOUR AU - Turgut, G. AU - Sacak, B. AU - Kiran, K. AU - Bas, L. PY - 2009 DA - 2009// TI - Use of rapid prototyping in prosthetic auricular restoration JO - J Craniofac Surg. VL - 20 UR - https://doi.org/10.1097/SCS.0b013e3181992266 DO - 10.1097/SCS.0b013e3181992266 ID - Turgut2009 ER - TY - JOUR AU - Giacomo, G. A. P. AU - Cury, P. R. AU - Araujo, N. S. AU - Sendyk, W. R. AU - Sendyk, C. L. PY - 2005 DA - 2005// TI - Clinical application of stereolithographic surgical guides for implant placement: preliminary results JO - J Periodontol VL - 76 UR - https://doi.org/10.1902/jop.2005.76.4.503 DO - 10.1902/jop.2005.76.4.503 ID - Giacomo2005 ER - TY - JOUR AU - Hananouchi, T. AU - Saito, M. AU - Koyama, T. AU - Hagio, K. AU - Murase, T. AU - Sugano, N. PY - 2009 DA - 2009// TI - Tailor-made surgical guide based on rapid prototyping technique for cup insertion in total hip arthroplasty JO - Int J Med Robot VL - 5 UR - https://doi.org/10.1002/rcs.243 DO - 10.1002/rcs.243 ID - Hananouchi2009 ER - TY - JOUR AU - Liu, X. J. AU - Gui, L. AU - Mao, C. AU - Peng, X. AU - Yu, G. Y. PY - 2009 DA - 2009// TI - Applying computer techniques in maxillofacial reconstruction using a fibula flap: a messenger and an evaluation method JO - J Craniofac Surg. VL - 20 UR - https://doi.org/10.1097/SCS.0b013e31819b9443 DO - 10.1097/SCS.0b013e31819b9443 ID - Liu2009 ER - TY - JOUR AU - Lu, S. AU - Xu, Y. Q. AU - Zhang, Y. Z. AU - Li, Y. B. AU - Xie, L. AU - Shi, J. H. PY - 2009 DA - 2009// TI - A novel computer-assisted drill guide template for lumbar pedicle screw placement: a cadaveric and clinical study JO - Int J Med Robot VL - 5 UR - https://doi.org/10.1002/rcs.249 DO - 10.1002/rcs.249 ID - Lu2009 ER - TY - JOUR AU - Chen, X. J. AU - Yuan, J. B. AU - Wang, C. T. AU - Huang, Y. L. AU - Kang, L. PY - 2010 DA - 2010// TI - Modular preoperative planning software for computer-aided oral implantology and the application of a novel stereolithographic template: a pilot study JO - Clin Implant Dent Relat Res VL - 12 ID - Chen2010 ER - TY - JOUR AU - Konrad, P. E. AU - Neimat, J. S. AU - Yu, H. AU - Kao, C. C. AU - Remple, M. S. AU - D’Haese, P. F. PY - 2011 DA - 2011// TI - Customized, miniature rapid-prototype stereotactic frames for use in deep brain stimulator surgery: initial clinical methodology and experience from 263 patients from 2002 to 2008 JO - Stereotact Funct Neurosurg VL - 89 UR - https://doi.org/10.1159/000322276 DO - 10.1159/000322276 ID - Konrad2011 ER - TY - JOUR AU - Morea, C. AU - Hayek, J. E. AU - Oleskovicz, C. AU - Dominguez, G. C. AU - Chilvarquer, I. PY - 2011 DA - 2011// TI - Precise insertion of orthodontic miniscrews with a stereolithographic surgical guide based on cone beam computed tomography data: a pilot study JO - Int J Oral Maxillofac Implants. VL - 26 ID - Morea2011 ER - TY - JOUR AU - Barrack, R. L. AU - Ruh, E. L. AU - Williams, B. M. AU - Ford, A. D. AU - Foreman, K. AU - Nunley, R. M. PY - 2012 DA - 2012// TI - Patient specific cutting blocks are currently of no proven value JO - J Bone Joint Surg-Series B. VL - 94 UR - https://doi.org/10.1302/0301-620X.94B11.30834 DO - 10.1302/0301-620X.94B11.30834 ID - Barrack2012 ER - TY - JOUR AU - Boonen, B. AU - Schotanus, M. G. M. AU - Kort, N. P. PY - 2012 DA - 2012// TI - Preliminary experience with the patient-specific templating total knee arthroplasty JO - Acta Orthop VL - 83 UR - https://doi.org/10.3109/17453674.2012.711700 DO - 10.3109/17453674.2012.711700 ID - Boonen2012 ER - TY - JOUR AU - Kunz, M. AU - Rudan, J. F. AU - Wood, G. C. A. AU - Ellis, R. E. PY - 2012 DA - 2012// TI - Hip resurfacing with individualized drill templates-comparison between anterolateral and posterior approach JO - Curr Orthop Practice. VL - 23 UR - https://doi.org/10.1097/BCO.0b013e318267f5f9 DO - 10.1097/BCO.0b013e318267f5f9 ID - Kunz2012 ER - TY - JOUR AU - Ng, V. Y. AU - DeClaire, J. H. AU - Berend, K. R. AU - Gulick, B. C. AU - Lombardi, A. V. PY - 2012 DA - 2012// TI - Improved accuracy of alignment with patient-specific positioning guides compared with manual instrumentation in TKA JO - Clin Orthop Relat Res VL - 470 UR - https://doi.org/10.1007/s11999-011-1996-6 DO - 10.1007/s11999-011-1996-6 ID - Ng2012 ER - TY - JOUR AU - Noble, J. W. AU - Moore, C. A. AU - Liu, N. PY - 2012 DA - 2012// TI - The value of patient-matched instrumentation in total knee arthroplasty JO - J Arthroplasty VL - 27 UR - https://doi.org/10.1016/j.arth.2011.07.006 DO - 10.1016/j.arth.2011.07.006 ID - Noble2012 ER - TY - JOUR AU - Nunley, R. M. AU - Ellison, B. S. AU - Ruh, E. L. AU - Williams, B. M. AU - Foreman, K. AU - Ford, A. D. PY - 2012 DA - 2012// TI - Are patient-specific cutting blocks cost-effective for total knee arthroplasty? JO - Clin Orthop Relat Res VL - 470 UR - https://doi.org/10.1007/s11999-011-2221-3 DO - 10.1007/s11999-011-2221-3 ID - Nunley2012 ER - TY - JOUR AU - Nunley, R. M. AU - Ellison, B. S. AU - Zhu, J. J. AU - Ruh, E. L. AU - Howell, S. M. AU - Barrack, R. L. PY - 2012 DA - 2012// TI - Do patient-specific guides improve coronal alignment in total knee arthroplasty? JO - Clin Orthop Relat Res VL - 470 UR - https://doi.org/10.1007/s11999-011-2222-2 DO - 10.1007/s11999-011-2222-2 ID - Nunley2012 ER - TY - JOUR AU - Yaffe, M. A. AU - Patel, A. AU - Mc Coy, B. W. AU - Luo, M. AU - Cayo, M. AU - Ghate, R. PY - 2012 DA - 2012// TI - Component sizing in total knee arthroplasty: patient-specific guides vs. computer-assisted navigation. Biomedizinische Technik JO - Biomed Eng VL - 57 UR - https://doi.org/10.1515/bmt-2011-0093 DO - 10.1515/bmt-2011-0093 ID - Yaffe2012 ER - TY - JOUR AU - Barke, S. AU - Musanhu, E. AU - Busch, C. AU - Stafford, G. AU - Field, R. PY - 2013 DA - 2013// TI - Patient-matched total knee arthroplasty: does it offer any clinical advantages JO - Acta Orthop Belg VL - 79 ID - Barke2013 ER - TY - JOUR AU - Boonen, B. AU - Schotanus, M. G. M. AU - Kerens, B. AU - Weegen, W. AU - Drumpt, R. A. M. AU - Kort, N. P. PY - 2013 DA - 2013// TI - Intra-operative results and radiological outcome of conventional and patient-specific surgery in total knee arthroplasty: a multicentre, randomised controlled trial JO - Knee Surg Sports Traumatol Arthrosc VL - 21 UR - https://doi.org/10.1007/s00167-013-2620-y DO - 10.1007/s00167-013-2620-y ID - Boonen2013 ER - TY - JOUR AU - Chareancholvanich, K. AU - Narkbunnam, R. AU - Pornrattanamaneewong, C. PY - 2013 DA - 2013// TI - A prospective randomised controlled study of patient-specific cutting guides compared with conventional instrumentation in total knee replacement JO - Bone Joint J. VL - 95 UR - https://doi.org/10.1302/0301-620X.95B3.29903 DO - 10.1302/0301-620X.95B3.29903 ID - Chareancholvanich2013 ER - TY - JOUR AU - Conteduca, F. AU - Iorio, R. AU - Mazza, D. AU - Caperna, L. AU - Bolle, G. AU - Argento, G. PY - 2013 DA - 2013// TI - Evaluation of the accuracy of a patient-specific instrumentation by navigation JO - Knee Surg Sports Traumatol Arthrosc VL - 21 UR - https://doi.org/10.1007/s00167-012-2098-z DO - 10.1007/s00167-012-2098-z ID - Conteduca2013 ER - TY - JOUR AU - Hamilton, W. G. AU - Parks, N. L. AU - Saxena, A. PY - 2013 DA - 2013// TI - Patient-specific instrumentation does not shorten surgical time: a prospective, randomized trial JO - J Arthroplasty VL - 28 UR - https://doi.org/10.1016/j.arth.2013.04.049 DO - 10.1016/j.arth.2013.04.049 ID - Hamilton2013 ER - TY - JOUR AU - Issa, K. AU - Rifai, A. AU - McGrath, M. S. AU - Callaghan, J. J. AU - Wright, C. AU - Malkani, A. L. PY - 2013 DA - 2013// TI - Reliability of templating with patient-specific instrumentation in total knee arthroplasty JO - J Knee Surg VL - 26 UR - https://doi.org/10.1055/s-0033-1343615 DO - 10.1055/s-0033-1343615 ID - Issa2013 ER - TY - JOUR AU - Kerens, B. AU - Boonen, B. AU - Schotanus, M. AU - Kort, N. PY - 2013 DA - 2013// TI - Patient-specific guide for revision of medial unicondylar knee arthroplasty to total knee arthroplasty: beneficial first results of a new operating technique performed on 10 patients JO - Acta Orthop VL - 84 UR - https://doi.org/10.3109/17453674.2013.785908 DO - 10.3109/17453674.2013.785908 ID - Kerens2013 ER - TY - JOUR AU - Liu, X. Z. AU - Shu, D. L. AU - Ran, W. AU - Guo, B. AU - Liao, X. PY - 2013 DA - 2013// TI - Digital surgical templates for managing high-energy zygomaticomaxillary complex injuries associated with orbital volume change: a quantitative assessment JO - J Oral Maxillofac Surg VL - 71 UR - https://doi.org/10.1016/j.joms.2013.06.197 DO - 10.1016/j.joms.2013.06.197 ID - Liu2013 ER - TY - JOUR AU - Merc, M. AU - Drstvensek, I. AU - Vogrin, M. AU - Brajlih, T. AU - Recnik, G. PY - 2013 DA - 2013// TI - A multi-level rapid prototyping drill guide template reduces the perforation risk of pedicle screw placement in the lumbar and sacral spine JO - Arch Orthop Trauma Surg VL - 133 UR - https://doi.org/10.1007/s00402-013-1755-0 DO - 10.1007/s00402-013-1755-0 ID - Merc2013 ER - TY - JOUR AU - Nam, D. AU - Maher, P. A. AU - Rebolledo, B. J. AU - Nawabi, D. H. AU - McLawhorn, A. S. AU - Pearle, A. D. PY - 2013 DA - 2013// TI - Patient specific cutting guides versus an imageless, computer-assisted surgery system in total knee arthroplasty JO - Knee. VL - 20 UR - https://doi.org/10.1016/j.knee.2012.12.009 DO - 10.1016/j.knee.2012.12.009 ID - Nam2013 ER - TY - JOUR AU - Parratte, S. AU - Blanc, G. AU - Boussemart, T. AU - Ollivier, M. AU - Corroller, T. AU - Argenson, J. N. PY - 2013 DA - 2013// TI - Rotation in total knee arthroplasty: no difference between patient-specific and conventional instrumentation JO - Knee Surgery Sports Traumatol Arthrosc VL - 21 UR - https://doi.org/10.1007/s00167-013-2623-8 DO - 10.1007/s00167-013-2623-8 ID - Parratte2013 ER - TY - JOUR AU - Pietsch, M. AU - Djahani, O. AU - Hochegger, M. AU - Plattner, F. AU - Hofmann, S. PY - 2013 DA - 2013// TI - Patient-specific total knee arthroplasty: the importance of planning by the surgeon JO - Knee Surgery Sports Traumatol Arthrosc VL - 21 UR - https://doi.org/10.1007/s00167-013-2624-7 DO - 10.1007/s00167-013-2624-7 ID - Pietsch2013 ER - TY - JOUR AU - Pietsch, M. AU - Djahani, O. AU - Zweiger, C. AU - Plattner, F. AU - Radl, R. AU - Tschauner, C. PY - 2013 DA - 2013// TI - Custom-fit minimally invasive total knee arthroplasty: effect on blood loss and early clinical outcomes JO - Knee Surg Sports Traumatol Arthrosc VL - 21 UR - https://doi.org/10.1007/s00167-012-2284-z DO - 10.1007/s00167-012-2284-z ID - Pietsch2013 ER - TY - JOUR AU - Pornrattanamaneewong, C. AU - Chareancholvanich, K. AU - Narkbunnam, R. PY - 2013 DA - 2013// TI - A prospective randomised controlled study of patient-specific cutting guides compared with conventional instrumentation in total knee replacement JO - J Bone Joint Surg-Series B. VL - 95 ID - Pornrattanamaneewong2013 ER - TY - JOUR AU - Roh, Y. W. AU - Kim, T. W. AU - Lee, S. AU - Seong, S. C. AU - Lee, M. C. PY - 2013 DA - 2013// TI - Is TKA using patient-specific instruments comparable to conventional TKA? A randomized controlled study of one system knee JO - Clin Orthop Relat Res VL - 471 UR - https://doi.org/10.1007/s11999-013-3206-1 DO - 10.1007/s11999-013-3206-1 ID - Roh2013 ER - TY - JOUR AU - Schweizer, A. AU - Furnstahl, P. AU - Nagy, L. PY - 2013 DA - 2013// TI - Three-dimensional correction of distal radius intra-articular malunions using patient-specific drill guides JO - J Hand Surg VL - 38 UR - https://doi.org/10.1016/j.jhsa.2013.09.023 DO - 10.1016/j.jhsa.2013.09.023 ID - Schweizer2013 ER - TY - JOUR AU - Stronach, B. M. AU - Pelt, C. E. AU - Erickson, J. AU - Peters, C. L. PY - 2013 DA - 2013// TI - Patient-specific total knee arthroplasty required frequent surgeon-directed changes JO - Clin Orthop Relat Res VL - 471 UR - https://doi.org/10.1007/s11999-012-2573-3 DO - 10.1007/s11999-012-2573-3 ID - Stronach2013 ER - TY - JOUR AU - Sugawara, T. AU - Higashiyama, N. AU - Kaneyama, S. AU - Takabatake, M. AU - Watanabe, N. AU - Uchida, F. PY - 2013 DA - 2013// TI - Multistep pedicle screw insertion procedure with patient-specific lamina fit-and-lock templates for the thoracic spine: clinical article JO - J Neurosurg Spine. VL - 19 UR - https://doi.org/10.3171/2013.4.SPINE121059 DO - 10.3171/2013.4.SPINE121059 ID - Sugawara2013 ER - TY - JOUR AU - Thienpont, E. AU - Paternostre, F. AU - Pietsch, M. AU - Hafez, M. AU - Howell, S. PY - 2013 DA - 2013// TI - Total knee arthroplasty with patient-specific instruments improves function and restores limb alignment in patients with extra-articular deformity JO - Knee. VL - 20 UR - https://doi.org/10.1016/j.knee.2013.07.001 DO - 10.1016/j.knee.2013.07.001 ID - Thienpont2013 ER - TY - JOUR AU - Victor, J. AU - Premanathan, A. PY - 2013 DA - 2013// TI - Virtual 3D planning and patient specific surgical guides for osteotomies around the knee: a feasibility and proof-of-concept study JO - Bone Joint J. VL - 95 UR - https://doi.org/10.1302/0301-620X.95B11.32950 DO - 10.1302/0301-620X.95B11.32950 ID - Victor2013 ER - TY - JOUR AU - Vundelinckx, B. J. AU - Bruckers, L. AU - Mulder, K. AU - Schepper, J. AU - Esbroeck, G. PY - 2013 DA - 2013// TI - Functional and radiographic short-term outcome evaluation of the visionaire system, a patient-matched instrumentation system for total knee arthroplasty JO - J Arthroplasty VL - 28 UR - https://doi.org/10.1016/j.arth.2012.09.010 DO - 10.1016/j.arth.2012.09.010 ID - Vundelinckx2013 ER - TY - JOUR AU - Adolphs, N. AU - Liu, W. AU - Keeve, E. AU - Hoffmeister, B. PY - 2014 DA - 2014// TI - RapidSplint: virtual splint generation for orthognathic surgery - results of a pilot series JO - Comput Aided Surg VL - 19 UR - https://doi.org/10.3109/10929088.2014.887778 DO - 10.3109/10929088.2014.887778 ID - Adolphs2014 ER - TY - JOUR AU - Asada, S. AU - Mori, S. AU - Matsushita, T. AU - Nakagawa, K. AU - Tsukamoto, I. AU - Akagi, M. PY - 2014 DA - 2014// TI - Comparison of MRI- and CT-based patient-specific guides for total knee arthroplasty JO - Knee. VL - 21 UR - https://doi.org/10.1016/j.knee.2014.08.015 DO - 10.1016/j.knee.2014.08.015 ID - Asada2014 ER - TY - JOUR AU - Barrett, W. AU - Hoeffel, D. AU - Dalury, D. AU - Mason, J. B. AU - Murphy, J. AU - Himden, S. PY - 2014 DA - 2014// TI - In-vivo alignment comparing patient specific instrumentation with both conventional and computer assisted surgery (cas) instrumentation in total knee arthroplasty JO - J Arthroplasty VL - 29 UR - https://doi.org/10.1016/j.arth.2013.06.029 DO - 10.1016/j.arth.2013.06.029 ID - Barrett2014 ER - TY - JOUR AU - Bell, S. W. AU - Stoddard, J. AU - Bennett, C. AU - London, N. J. PY - 2014 DA - 2014// TI - Accuracy and early outcomes in medial unicompartmental knee arthroplasty performed using patient specific instrumentation JO - Knee. VL - 21 UR - https://doi.org/10.1016/S0968-0160(14)50007-5 DO - 10.1016/S0968-0160(14)50007-5 ID - Bell2014 ER - TY - JOUR AU - Cenni, F. AU - Timoncini, A. AU - Ensini, A. AU - Tamarri, S. AU - Belvedere, C. AU - D’Angeli, V. PY - 2014 DA - 2014// TI - Three-dimensional implant position and orientation after total knee replacement performed with patient-specific instrumentation systems JO - J Orthop Res VL - 32 UR - https://doi.org/10.1002/jor.22513 DO - 10.1002/jor.22513 ID - Cenni2014 ER - TY - JOUR AU - Chen, J. Y. AU - Yeo, S. J. AU - Yew, A. K. AU - Tay, D. K. AU - Chia, S. L. AU - Lo, N. N. PY - 2014 DA - 2014// TI - The radiological outcomes of patient-specific instrumentation versus conventional total knee arthroplasty JO - Knee surgery, sports traumatology, arthroscopy: official journal of the ESSKA. VL - 22 UR - https://doi.org/10.1007/s00167-013-2638-1 DO - 10.1007/s00167-013-2638-1 ID - Chen2014 ER - TY - JOUR AU - Crane, C. AU - Marimuthu, K. AU - Chen, D. B. AU - Harris, I. A. AU - Wheatley, E. AU - MacDessi, S. J. PY - 2014 DA - 2014// TI - Radiographic outcome of limb-based versus knee-based patient specific guides in total knee arthroplasty JO - Knee. VL - 21 UR - https://doi.org/10.1016/j.knee.2014.08.013 DO - 10.1016/j.knee.2014.08.013 ID - Crane2014 ER - TY - JOUR AU - Daniilidis, K. AU - Tibesku, C. O. PY - 2014 DA - 2014// TI - A comparison of conventional and patient-specific instruments in total knee arthroplasty JO - Int Orthop VL - 38 UR - https://doi.org/10.1007/s00264-013-2028-9 DO - 10.1007/s00264-013-2028-9 ID - Daniilidis2014 ER - TY - JOUR AU - Wouters, S. AU - Tran Duy, K. AU - Docquier, P. L. PY - 2014 DA - 2014// TI - Patient-specific instruments for surgical resection of painful tarsal coalition in adolescents JO - Orthopaedics & traumatology, surgery & research: OTSR. VL - 100 UR - https://doi.org/10.1016/j.otsr.2014.02.009 DO - 10.1016/j.otsr.2014.02.009 ID - Wouters2014 ER - TY - JOUR AU - Ensini, A. AU - Timoncini, A. AU - Cenni, F. AU - Belvedere, C. AU - Fusai, F. AU - Leardini, A. PY - 2014 DA - 2014// TI - Intra- and post-operative accuracy assessments of two different patient-specific instrumentation systems for total knee replacement JO - Knee Surg Sports Traumatol Arthrosc VL - 22 UR - https://doi.org/10.1007/s00167-013-2667-9 DO - 10.1007/s00167-013-2667-9 ID - Ensini2014 ER - TY - JOUR AU - Franceschi, J. P. AU - Sbihi, A. PY - 2014 DA - 2014// TI - 3D templating and patient-specific cutting guides (Knee-Plan) in total knee arthroplasty: postoperative CT-based assessment of implant positioning JO - Orthop Traumatol Surg Res VL - 100 UR - https://doi.org/10.1016/j.otsr.2014.04.003 DO - 10.1016/j.otsr.2014.04.003 ID - Franceschi2014 ER - TY - JOUR AU - Helmy, N. AU - Dao Trong, M. L. AU - Kuhnel, S. P. PY - 2014 DA - 2014// TI - Accuracy of patient specific cutting blocks in total knee arthroplasty JO - BioMed Res Int VL - 2014 ID - Helmy2014 ER - TY - JOUR AU - Heyse, T. J. AU - Tibesku, C. O. PY - 2014 DA - 2014// TI - Improved femoral component rotation in TKA using patient-specific instrumentation JO - Knee. VL - 21 UR - https://doi.org/10.1016/j.knee.2012.10.009 DO - 10.1016/j.knee.2012.10.009 ID - Heyse2014 ER - TY - JOUR AU - Holzapfel, B. M. AU - Pilge, H. AU - Prodinger, P. M. AU - Toepfer, A. AU - Mayer-Wagner, S. AU - Hutmacher, D. W. PY - 2014 DA - 2014// TI - Customised osteotomy guides and endoprosthetic reconstruction for periacetabular tumours JO - Int Orthop VL - 38 ID - Holzapfel2014 ER - TY - JOUR AU - Kang, S. H. AU - Lee, J. W. AU - Lim, S. H. AU - Kim, Y. H. AU - Kim, M. K. PY - 2014 DA - 2014// TI - Verification of the usability of a navigation method in dental implant surgery: in vitro comparison with the stereolithographic surgical guide template method JO - J Cranio-Maxillofac Surg VL - 42 UR - https://doi.org/10.1016/j.jcms.2014.04.025 DO - 10.1016/j.jcms.2014.04.025 ID - Kang2014 ER - TY - JOUR AU - Kassab, S. AU - Pietrzak, W. S. PY - 2014 DA - 2014// TI - Patient-specific positioning guides versus manual instrumentation for total knee arthroplasty: an intraoperative comparison JO - J Surg Orthop Adv VL - 23 UR - https://doi.org/10.3113/JSOA.2014.0140 DO - 10.3113/JSOA.2014.0140 ID - Kassab2014 ER - TY - JOUR AU - Kotela, A. AU - Kotela, I. PY - 2014 DA - 2014// TI - Patient-specific computed tomography based instrumentation in total knee arthroplasty: a prospective randomized controlled study JO - Int Orthop VL - 38 UR - https://doi.org/10.1007/s00264-014-2399-6 DO - 10.1007/s00264-014-2399-6 ID - Kotela2014 ER - TY - JOUR AU - MacDessi, S. J. AU - Jang, B. AU - Harris, I. A. AU - Wheatley, E. AU - Bryant, C. AU - Chen, D. B. PY - 2014 DA - 2014// TI - A comparison of alignment using patient specific guides, computer navigation and conventional instrumentation in total knee arthroplasty JO - Knee. VL - 21 UR - https://doi.org/10.1016/j.knee.2013.11.004 DO - 10.1016/j.knee.2013.11.004 ID - MacDessi2014 ER - TY - JOUR AU - Marimuthu, K. AU - Chen, D. B. AU - Harris, I. A. AU - Wheatley, E. AU - Bryant, C. J. AU - MacDessi, S. J. PY - 2014 DA - 2014// TI - A multi-planar CT-based comparative analysis of patient-specific cutting guides with conventional instrumentation in total knee arthroplasty JO - J Arthroplasty VL - 29 UR - https://doi.org/10.1016/j.arth.2013.12.019 DO - 10.1016/j.arth.2013.12.019 ID - Marimuthu2014 ER - TY - JOUR AU - Moopanar, T. R. AU - Amaranath, J. E. AU - Sorial, R. M. PY - 2014 DA - 2014// TI - Component position alignment with patient-specific jigs in total knee arthroplasty JO - Anz J Surg VL - 84 UR - https://doi.org/10.1111/ans.12674 DO - 10.1111/ans.12674 ID - Moopanar2014 ER - TY - JOUR AU - Moubarak, H. AU - Brilhault, J. PY - 2014 DA - 2014// TI - Contribution of patient-specific cutting guides to lower limb alignment for total knee arthroplasty JO - Orthop Traumatol-Surg Res VL - 100 UR - https://doi.org/10.1016/j.otsr.2014.03.006 DO - 10.1016/j.otsr.2014.03.006 ID - Moubarak2014 ER - TY - JOUR AU - Renson, L. AU - Poilvache, P. AU - Wyngaert, H. PY - 2014 DA - 2014// TI - Improved alignment and operating room efficiency with patient-specific instrumentation for TKA JO - Knee. VL - 21 UR - https://doi.org/10.1016/j.knee.2014.09.008 DO - 10.1016/j.knee.2014.09.008 ID - Renson2014 ER - TY - JOUR AU - Scholes, C. AU - Sahni, V. AU - Lustig, S. AU - Parker, D. A. AU - Coolican, M. R. J. PY - 2014 DA - 2014// TI - Patient-specific instrumentation for total knee arthroplasty does not match the pre-operative plan as assessed by intra-operative computer-assisted navigation JO - Knee Surg Sports Traumatol Arthrosc VL - 22 UR - https://doi.org/10.1007/s00167-013-2670-1 DO - 10.1007/s00167-013-2670-1 ID - Scholes2014 ER - TY - JOUR AU - Silva, A. AU - Sampaio, R. AU - Pinto, E. PY - 2014 DA - 2014// TI - Patient-specific instrumentation improves tibial component rotation in TKA JO - Knee Surg Sports Traumatol Arthrosc VL - 22 UR - https://doi.org/10.1007/s00167-013-2639-0 DO - 10.1007/s00167-013-2639-0 ID - Silva2014 ER - TY - JOUR AU - Small, T. AU - Krebs, V. AU - Molloy, R. AU - Bryan, J. AU - Klika, A. K. AU - Barsoum, W. K. PY - 2014 DA - 2014// TI - Comparison of acetabular shell position using patient specific instruments vs. standard surgical instruments: a randomized clinical trial JO - J Arthroplasty VL - 29 UR - https://doi.org/10.1016/j.arth.2013.10.006 DO - 10.1016/j.arth.2013.10.006 ID - Small2014 ER - TY - JOUR AU - Victor, J. AU - Dujardin, J. AU - Vandenneucker, H. AU - Arnout, N. AU - Bellemans, J. PY - 2014 DA - 2014// TI - Patient-specific guides do not improve accuracy in total knee arthroplasty: a prospective randomized controlled trial JO - Clin Orthop Relat Res VL - 472 UR - https://doi.org/10.1007/s11999-013-2997-4 DO - 10.1007/s11999-013-2997-4 ID - Victor2014 ER - TY - JOUR AU - Woolson, S. T. AU - Harris, A. H. AU - Wagner, D. W. AU - Giori, N. J. PY - 2014 DA - 2014// TI - Component alignment during total knee arthroplasty with use of standard or custom instrumentation: a randomized clinical trial using computed tomography for postoperative alignment measurement JO - J Bone Joint Surg Am Vol VL - 96 UR - https://doi.org/10.2106/JBJS.L.01722 DO - 10.2106/JBJS.L.01722 ID - Woolson2014 ER - TY - JOUR AU - Yaffe, M. AU - Luo, M. AU - Goyal, N. AU - Chan, P. AU - Patel, A. AU - Cayo, M. PY - 2014 DA - 2014// TI - Clinical, functional, and radiographic outcomes following total knee arthroplasty with patient-specific instrumentation, computer-assisted surgery, and manual instrumentation: a short-term follow-up study JO - Int J Comput Assist Radiol Surg VL - 9 UR - https://doi.org/10.1007/s11548-013-0968-6 DO - 10.1007/s11548-013-0968-6 ID - Yaffe2014 ER - TY - JOUR AU - Abane, L. AU - Anract, P. AU - Boisgard, S. AU - Descamps, S. AU - Courpied, J. P. AU - Hamadouche, M. PY - 2015 DA - 2015// TI - A comparison of patient-specific and conventional instrumentation for total knee arthroplasty: a multicentre randomised controlled trial JO - Bone Joint J. VL - 97 UR - https://doi.org/10.1302/0301-620X.97B1.34440 DO - 10.1302/0301-620X.97B1.34440 ID - Abane2015 ER - TY - JOUR AU - Huang, Z. AU - Wang, X. Z. AU - Hou, Y. Z. PY - 2015 DA - 2015// TI - Novel method of fabricating individual trays for maxillectomy patients by computer-aided design and rapid prototyping JO - J Prosthodont VL - 24 UR - https://doi.org/10.1111/jopr.12183 DO - 10.1111/jopr.12183 ID - Huang2015 ER - TY - JOUR AU - Leeuwen, J. A. AU - Grogaard, B. AU - Nordsletten, L. AU - Rohrl, S. M. PY - 2015 DA - 2015// TI - Comparison of planned and achieved implant position in total knee arthroplasty with patient-specific positioning guides JO - Acta Orthop VL - 86 UR - https://doi.org/10.3109/17453674.2014.985154 DO - 10.3109/17453674.2014.985154 ID - Leeuwen2015 ER - TY - JOUR AU - Abdel, M. P. AU - Roth, P. AU - Hommel, H. AU - Perka, C. AU - Pfitzner, T. PY - 2015 DA - 2015// TI - Intraoperative navigation of patient-specific instrumentation does not predict final implant position JO - J Arthroplasty VL - 30 UR - https://doi.org/10.1016/j.arth.2014.11.005 DO - 10.1016/j.arth.2014.11.005 ID - Abdel2015 ER - TY - STD TI - Boonen B, Schotanus MG, Kerens B, Hulsmans FJ, Tuinebreijer WE, Kort NP. Patient-specific positioning guides for total knee arthroplasty: no significant difference between final component alignment and pre-operative digital plan except for tibial rotation. Knee Surg Sports Traumatol Arthrosc. 2015: 1–9 ID - ref192 ER - TY - JOUR AU - Chinnappa, J. AU - Chen, D. B. AU - Harris, I. A. AU - MacDessi, S. J. PY - 2015 DA - 2015// TI - Total knee arthroplasty using patient-specific guides: Is there a learning curve? JO - Knee. VL - 22 UR - https://doi.org/10.1016/j.knee.2015.03.002 DO - 10.1016/j.knee.2015.03.002 ID - Chinnappa2015 ER - TY - JOUR AU - Ferrara, F. AU - Cipriani, A. AU - Magarelli, N. AU - Rapisarda, S. AU - Santis, V. AU - Burrofato, A. PY - 2015 DA - 2015// TI - Implant positioning in TKA: comparison between conventional and patient-specific instrumentation JO - Orthopedics. VL - 38 UR - https://doi.org/10.3928/01477447-20150402-54 DO - 10.3928/01477447-20150402-54 ID - Ferrara2015 ER - TY - JOUR AU - Frye, B. M. AU - Najim, A. A. AU - Adams, J. B. AU - Berend, K. R. AU - Lombardi, A. V. PY - 2015 DA - 2015// TI - MRI is more accurate than CT for patient-specific total knee arthroplasty JO - Knee. VL - 22 UR - https://doi.org/10.1016/j.knee.2015.02.014 DO - 10.1016/j.knee.2015.02.014 ID - Frye2015 ER - TY - JOUR AU - Gan, Y. AU - Ding, J. AU - Xu, Y. AU - Hou, C. PY - 2015 DA - 2015// TI - Accuracy and efficacy of osteotomy in total knee arthroplasty with patient-specific navigational template JO - Int J Clin Exp Med VL - 8 ID - Gan2015 ER - TY - JOUR AU - Goyal, N. AU - Patel, A. R. AU - Yaffe, M. A. AU - Luo, M. Y. AU - Stulberg, S. D. PY - 2015 DA - 2015// TI - Does implant design influence the accuracy of patient specific instrumentation in total knee arthroplasty? JO - J Arthroplasty VL - 30 UR - https://doi.org/10.1016/j.arth.2015.03.019 DO - 10.1016/j.arth.2015.03.019 ID - Goyal2015 ER - TY - JOUR AU - Hananouchi, T. PY - 2015 DA - 2015// TI - Sagittal gap balancing with the concept of a single radius femoral component in posterior cruciate sacrificing total knee arthroplasty with patient-specific instrumentation JO - Int Orthop VL - 39 UR - https://doi.org/10.1007/s00264-014-2536-2 DO - 10.1007/s00264-014-2536-2 ID - Hananouchi2015 ER - TY - STD TI - Heylen S, Van Haver A, Vuylsteke K, Declercq G, Verborgt O. Patient-specific instrument guidance of glenoid component implantation reduces inclination variability in total and reverse shoulder arthroplasty. J Shoulder Elbow Surg. 2015. ID - ref199 ER - TY - JOUR AU - Hsu, A. R. AU - Davis, W. H. AU - Cohen, B. E. AU - Jones, C. P. AU - Ellington, J. K. AU - Anderson, R. B. PY - 2015 DA - 2015// TI - Radiographic outcomes of preoperative CT scan-derived patient-specific total ankle arthroplasty JO - Foot Ankle Int VL - 36 UR - https://doi.org/10.1177/1071100715585561 DO - 10.1177/1071100715585561 ID - Hsu2015 ER - TY - JOUR AU - Huang, D. AU - Chen, M. AU - He, D. AU - Yang, C. AU - Yuan, J. AU - Bai, G. PY - 2015 DA - 2015// TI - Preservation of the inferior alveolar neurovascular bundle in the osteotomy of benign lesions of the mandible using a digital template JO - Br J Oral Maxillofac Surg VL - 53 UR - https://doi.org/10.1016/j.bjoms.2015.04.013 DO - 10.1016/j.bjoms.2015.04.013 ID - Huang2015 ER - TY - JOUR AU - Kaneyama, S. AU - Sugawara, T. AU - Sumi, M. PY - 2015 DA - 2015// TI - Safe and accurate midcervical pedicle screw insertion procedure with the patient-specific screw guide template system JO - Spine. VL - 40 UR - https://doi.org/10.1097/BRS.0000000000000772 DO - 10.1097/BRS.0000000000000772 ID - Kaneyama2015 ER - TY - JOUR AU - Kang, S. H. AU - Kim, H. J. AU - Park, H. W. AU - Lee, S. H. PY - 2015 DA - 2015// TI - Maxillary cutting guide for executing a simulated osteotomy and removing the bony interference during orthognathic surgery JO - J Med Devices. VL - 9 UR - https://doi.org/10.1115/1.4031162 DO - 10.1115/1.4031162 ID - Kang2015 ER - TY - JOUR AU - Kerens, B. AU - Schotanus, M. G. AU - Boonen, B. AU - Kort, N. P. PY - 2015 DA - 2015// TI - No radiographic difference between patient-specific guiding and conventional Oxford UKA surgery JO - Knee Surg Sports Traumatol Arthrosc VL - 23 UR - https://doi.org/10.1007/s00167-014-2849-0 DO - 10.1007/s00167-014-2849-0 ID - Kerens2015 ER - TY - JOUR AU - Kunz, M. AU - Balaketheeswaran, S. AU - Ellis, R. E. AU - Rudan, J. F. PY - 2015 DA - 2015// TI - The influence of osteophyte depiction in CT for patient-specific guided hip resurfacing procedures JO - Int J Comput Assist Radiol Surg VL - 10 UR - https://doi.org/10.1007/s11548-015-1200-7 DO - 10.1007/s11548-015-1200-7 ID - Kunz2015 ER - TY - JOUR AU - Merc, M. AU - Vogrin, M. AU - Recnik, G. AU - Drstvensek, I. AU - Brajlih, T. AU - Friedrich, T. PY - 2014 DA - 2014// TI - Error rate of multi-level rapid prototyping trajectories for pedicle screw placement in lumbar and sacral spine JO - Chinese J Traumatol VL - 17 ID - Merc2014 ER - TY - JOUR AU - Mihalko, W. M. PY - 2015 DA - 2015// TI - Patient-specific cutting guides were not better than conventional instrumentation for total knee arthroplasty JO - J Bone Joint Surgery Am Vol VL - 97 UR - https://doi.org/10.2106/JBJS.9722.ebo103 DO - 10.2106/JBJS.9722.ebo103 ID - Mihalko2015 ER - TY - JOUR AU - Nam, D. AU - Park, A. AU - Stambough, J. B. AU - Johnson, S. R. AU - Nunley, R. M. AU - Barrack, R. L. PY - 2015 DA - 2015// TI - The Mark Coventry Award: custom cutting guides do not improve total knee arthroplasty clinical outcomes at 2 years followup JO - Clin Orthop Relat Res. VL - 474 UR - https://doi.org/10.1007/s11999-015-4216-y DO - 10.1007/s11999-015-4216-y ID - Nam2015 ER - TY - JOUR AU - Nam, D. AU - Williams, B. AU - Hirsh, J. AU - Johnson, S. R. AU - Nunley, R. M. AU - Barrack, R. L. PY - 2015 DA - 2015// TI - Planned bone resections using an MRI-based custom cutting guide system versus 3-dimensional, weight-bearing images in total knee arthroplasty JO - J Arthroplasty VL - 30 UR - https://doi.org/10.1016/j.arth.2014.11.009 DO - 10.1016/j.arth.2014.11.009 ID - Nam2015 ER - TY - JOUR AU - Nankivell, M. AU - West, G. AU - Pourgiezis, N. PY - 2015 DA - 2015// TI - Operative efficiency and accuracy of patient-specific cutting guides in total knee replacement JO - ANZ J Surg. VL - 85 UR - https://doi.org/10.1111/ans.12906 DO - 10.1111/ans.12906 ID - Nankivell2015 ER - TY - JOUR AU - Pfitzner, T. AU - Abdel, M. P. AU - Roth, P. AU - Perka, C. AU - Hommel, H. PY - 2014 DA - 2014// TI - Small improvements in mechanical axis alignment achieved with mri versus ct-based patient-specific instruments in TKA: a randomized clinical trial JO - Clin Orthop Relat Res VL - 472 UR - https://doi.org/10.1007/s11999-014-3784-6 DO - 10.1007/s11999-014-3784-6 ID - Pfitzner2014 ER - TY - JOUR AU - Rathod, P. A. AU - Deshmukh, A. J. AU - Cushner, F. D. PY - 2015 DA - 2015// TI - Reducing blood loss in bilateral total knee arthroplasty with patient-specific instrumentation JO - Orthop Clin N Am. VL - 46 UR - https://doi.org/10.1016/j.ocl.2015.02.003 DO - 10.1016/j.ocl.2015.02.003 ID - Rathod2015 ER - TY - JOUR AU - Schepers, R. H. AU - Raghoebar, G. M. AU - Vissink, A. AU - Stenekes, M. W. AU - Kraeima, J. AU - Roodenburg, J. L. PY - 2015 DA - 2015// TI - Accuracy of fibula reconstruction using patient-specific CAD/CAM reconstruction plates and dental implants: a new modality for functional reconstruction of mandibular defects JO - J Cranio-Maxillofac Surg VL - 43 UR - https://doi.org/10.1016/j.jcms.2015.03.015 DO - 10.1016/j.jcms.2015.03.015 ID - Schepers2015 ER - TY - JOUR AU - Schlatterer, B. AU - Linares, J. M. AU - Cazal, J. AU - Merloz, P. AU - Plaweski, S. PY - 2015 DA - 2015// TI - Posterior tibial slope accuracy with patient-specific cutting guides during total knee arthroplasty: a preliminary study of 50 cases JO - Orthop Traumatol Surg Res VL - 101 UR - https://doi.org/10.1016/j.otsr.2015.06.005 DO - 10.1016/j.otsr.2015.06.005 ID - Schlatterer2015 ER - TY - JOUR AU - Schotanus, M. G. M. AU - Haaren, E. H. AU - Hendrickx, R. P. M. AU - Jansen, E. J. P. AU - Kort, N. P. PY - 2015 DA - 2015// TI - Accuracy of CT-based patient-specific guides for total knee arthroplasty in patients with post-traumatic osteoarthritis JO - Eur J Orthop Surg Traumatol VL - 25 UR - https://doi.org/10.1007/s00590-015-1677-3 DO - 10.1007/s00590-015-1677-3 ID - Schotanus2015 ER - TY - JOUR AU - Shi, L. AU - Liu, W. AU - Yin, L. AU - Feng, S. AU - Xu, S. AU - Zhang, Z. Y. PY - 2015 DA - 2015// TI - Surgical guide assistant mandibular distraction osteogenesis and sagittal split osteotomy in the treatment of hemifacial microsomia JO - J Craniofac Surg. VL - 26 UR - https://doi.org/10.1097/SCS.0000000000001529 DO - 10.1097/SCS.0000000000001529 ID - Shi2015 ER - TY - JOUR AU - Subramanya, S. AU - Herald, J. PY - 2014 DA - 2014// TI - Reverse shoulder arthroplasty with patient-specific glenoid implant positioning guides JO - Tech Shoulder Elbow Surg VL - 15 UR - https://doi.org/10.1097/BTE.0000000000000035 DO - 10.1097/BTE.0000000000000035 ID - Subramanya2014 ER - TY - JOUR AU - Throckmorton, T. W. AU - Vogt, W. AU - Wasmaier, J. AU - Hurst, J. M. AU - Frostick, S. AU - Sperling, J. W. PY - 2014 DA - 2014// TI - Patient-specific targeting guides for glenoid component placement in shoulder arthroplasty: technique and initial clinical experience JO - Tech Shoulder Elbow Surg VL - 15 UR - https://doi.org/10.1097/BTE.0000000000000029 DO - 10.1097/BTE.0000000000000029 ID - Throckmorton2014 ER - TY - JOUR AU - Toto, J. M. AU - Chang, E. I. AU - Agag, R. AU - Devarajan, K. AU - Patel, S. A. AU - Topham, N. S. PY - 2015 DA - 2015// TI - Improved operative efficiency of free fibula flap mandible reconstruction with patient-specific, computer-guided preoperative planning JO - Head Neck VL - 37 UR - https://doi.org/10.1002/hed.23815 DO - 10.1002/hed.23815 ID - Toto2015 ER - TY - JOUR AU - Trong, M. L. D. AU - Diezi, C. AU - Goerres, G. AU - Helmy, N. PY - 2015 DA - 2015// TI - Improved positioning of the tibial component in unicompartmental knee arthroplasty with patient-specific cutting blocks JO - Knee Surg Sports Traumatol Arthrosc VL - 23 UR - https://doi.org/10.1007/s00167-014-2839-2 DO - 10.1007/s00167-014-2839-2 ID - Trong2015 ER - TY - JOUR AU - Vlachopoulos, L. AU - Schweizer, A. AU - Graf, M. AU - Nagy, L. AU - Furnstahl, P. PY - 2015 DA - 2015// TI - Three-dimensional postoperative accuracy of extra-articular forearm osteotomies using CT-scan based patient-specific surgical guides JO - BMC Musculoskelet Disord VL - 16 UR - https://doi.org/10.1186/s12891-015-0793-x DO - 10.1186/s12891-015-0793-x ID - Vlachopoulos2015 ER - TY - JOUR AU - Volpi, P. AU - Prospero, E. AU - Bait, C. AU - Cervellin, M. AU - Quaglia, A. AU - Redaelli, A. PY - 2015 DA - 2015// TI - High accuracy in knee alignment and implant placement in unicompartmental medial knee replacement when using patient-specific instrumentation JO - Knee Surg Sports Traumatol Arthrosc VL - 23 UR - https://doi.org/10.1007/s00167-013-2794-3 DO - 10.1007/s00167-013-2794-3 ID - Volpi2015 ER - TY - JOUR AU - Ye, N. AU - Long, H. AU - Zhu, S. AU - Yang, Y. AU - Lai, W. AU - Hu, J. PY - 2015 DA - 2015// TI - The accuracy of computer image-guided template for mandibular angle ostectomy JO - Aesthetic Plast Surg VL - 39 UR - https://doi.org/10.1007/s00266-014-0424-1 DO - 10.1007/s00266-014-0424-1 ID - Ye2015 ER - TY - JOUR AU - Ying, B. AU - Ye, N. AU - Jiang, Y. AU - Liu, Y. AU - Hu, J. AU - Zhu, S. PY - 2015 DA - 2015// TI - Correction of facial asymmetry associated with vertical maxillary excess and mandibular prognathism by combined orthognathic surgery and guiding templates and splints fabricated by rapid prototyping technique JO - Int J Oral Maxillofac Surg VL - 44 UR - https://doi.org/10.1016/j.ijom.2015.05.012 DO - 10.1016/j.ijom.2015.05.012 ID - Ying2015 ER - TY - JOUR AU - Zinser, M. AU - Zoeller, J. PY - 2015 DA - 2015// TI - Computer-designed splints for surgical transfer of 3D orthognathic planning JO - Fac Plast Surg VL - 31 UR - https://doi.org/10.1055/s-0035-1565010 DO - 10.1055/s-0035-1565010 ID - Zinser2015 ER - TY - JOUR AU - Demange, M. K. AU - Keudell, A. AU - Probst, C. AU - Yoshioka, H. AU - Gomoll, A. H. PY - 2015 DA - 2015// TI - Patient-specific implants for lateral unicompartmental knee arthroplasty JO - Int Orthop VL - 39 UR - https://doi.org/10.1007/s00264-015-2678-x DO - 10.1007/s00264-015-2678-x ID - Demange2015 ER - TY - JOUR AU - Malik, H. H. AU - Darwood, A. R. J. AU - Shaunak, S. AU - Kulatilake, P. AU - El-Hilly, A. A. AU - Mulki, O. PY - 2015 DA - 2015// TI - Three-dimensional printing in surgery: a review of current surgical applications JO - J Surg Res VL - 199 UR - https://doi.org/10.1016/j.jss.2015.06.051 DO - 10.1016/j.jss.2015.06.051 ID - Malik2015 ER -