Table 1 Geometrical parameters of the VCs in Group I, II and III
From: Influence of the hole geometry on the flow distribution in ventricular catheters for hydrocephalus
Outer diameter | Tilt angle | Distance to the tip | |
|---|---|---|---|
Group I | |||
Model 1 | (0.5, 0.5, 0.5) | (0.0, 0.0, 45.0) | (4.0, 10.0, 16.0) |
Model 2 | (0.5, 0.5, 0.5) | (0.0, 45.0, 0.0) | (4.0, 10.0, 16.0) |
Model 3 | (0.5, 0.5, 0.5) | (45.0, 0.0, 0.0) | (4.0, 10.0, 16.0) |
Group II | |||
Model 4 | (0.5, 0.5, 1.0) | (0.0, 0.0, 0.0) | (4.0, 10.0, 16.0) |
Model 5 | (0.5, 1.0, 0.5) | (0.0, 0.0, 0.0) | (4.0, 10.0, 16.0) |
Model 6 | (1.0, 0.5, 0.5) | (0.0, 0.0, 0.0) | (4.0, 10.0, 16.0) |
Group III | |||
Model 7 | (1.3, 1.1, 0.5) | (0.0, 0.0, 0.0) | (4.0, 6.0, 16.0) |
Model 8 | (1.3, 0.94, 0.5) | (0.0, 0.0, 0.0) | (4.0, 8.0, 16.0) |
Model 9 | (1.3, 0.8, 0.5) | (0.0, 0.0, 0.0) | (4.0, 10.0, 16.0) |
Model 10 | (1.3, 0.68, 0.5) | (0.0, 0.0, 0.0) | (4.0, 12.0, 16.0) |