Skip to main content
Figure 7 | BioMedical Engineering OnLine

Figure 7

From: Investigating the possible effect of electrode support structure on motion artifact in wearable bioelectric signal monitoring

Figure 7

The RMS amplitudes of the change in the impedance calculated for each motion range of Pattern 2 presented as boxplots. Each box corresponds to a specific applied force and the motion artifact RMS’s are plotted for each increasing range of Pattern 2, from left to right (2.5°, 5°, 7.5°, 10°, and 12.5° of servo rotation). The dot in the center of each blue column is the median, and the edges of the blue columns are the 25th and 75th percentiles. The lines that extend from the columns are the data points out of this percentile range which are not considered outliers. The outliers are plotted separately as empty circles.

Back to article page