Skip to main content
Figure 1 | BioMedical Engineering OnLine

Figure 1

From: Evaluation of an open access software for calculating glucose variability parameters of a continuous glucose monitoring system applied at pediatric intensive care unit

Figure 1

An example of a CGM curve with its MAGE curve. A represents a CGM curve. In some cases from the first glucose concentration (G (t1)) both the glucose maximum (G (t) MAX) and the minimum glucose values (G (t) MIN) did not exceed the meaningful excursion (ME = 45 mg/dL) [G (t) MAX - G (t1) and G (t1)-G (t) MIN ≤ ME], however, the entire curve contained MEs. On these occasions the program set the new starting point - in this case G (t) MAX. B shows the MAGE curve.

Back to article page