Skip to main content
Figure 4 | BioMedical Engineering OnLine

Figure 4

From: In vitro-analysis of kinematics and intradiscal pressures in cervical arthroplasty versus fusion – A biomechanical study in a sheep model with two semi-constrained prosthesis

Figure 4

Mean tROM [degrees] with standard deviation at the maximum loading of ±2 Nm. Range of motion in flexion-extension, lateral bending and axial rotation in the three different conditions: intact, arthrodesis C3/4 and TDR C3/4 with Type D-prosthesis (a) and Type A-prosthesis (b). Statistically significant differences are signed by * with bars connecting the corresponding columns.

Back to article page

BioMedical Engineering OnLine

ISSN: 1475-925X

Contact us