Skip to main content

Table 1 Laser parameters for PTB

From: Photochemical tissue bonding with chitosan adhesive films

  N Area
(mm2) 		Power
(W) 		Time
(s) 		Fluence
(J/cm2) 		I
(W/cm2) 		Max Load/Area
(kPa)
Adhesive+Laser 31 60 ± 10 0.18 ± 0.03 365 ± 5 110 ~0.9 15.1 ± 1.2
Adhesive 8 60 ± 10 NA NA NA NA 0.5 ± 0.1
  1. N, sample number; Area, surface area of the rose adhesive (mean ± maximum error); Power, laser power (mean ± maximum error); Time, irradiation time (mean ± maximum error), Fluence, average laser fluence, I, estimated irradiance; Max Load/Area, maximum load at failure of the repaired tissue divided by the adhesive surface area, (mean ± SE).
Back to article page

BioMedical Engineering OnLine

ISSN: 1475-925X

Contact us