Skip to main content
Figure 5 | BioMedical Engineering OnLine

Figure 5

From: Calculation of arterial wall temperature in atherosclerotic arteries: effect of pulsatile flow, arterial geometry, and plaque structure

Figure 5

Transient temperature distribution at the plaque/lumen interface for the arterial bifurcation at different times. Temperature distribution is produced by variations in the local heat generation in the plaque q Ë™ MathType@MTEF@5@5@+=feaafiart1ev1aaatCvAUfKttLearuWrP9MDH5MBPbIqV92AaeXatLxBI9gBaebbnrfifHhDYfgasaacH8akY=wiFfYdH8Gipec8Eeeu0xXdbba9frFj0=OqFfea0dXdd9vqai=hGuQ8kuc9pgc9s8qqaq=dirpe0xb9q8qiLsFr0=vr0=vr0dc8meaabaqaciaacaGaaeqabaqabeGadaaakeaacuWGXbqCgaGaaaaa@2E20@ m (W/mm3). The times indicated correspond to t = 4.0,4.4,4.6 and 4.8 s. The inlet velocity profile for this arterial geometry is given in Figure 2b.

Back to article page