Skip to main content
Figure 11 | BioMedical Engineering OnLine

Figure 11

From: Calculation of arterial wall temperature in atherosclerotic arteries: effect of pulsatile flow, arterial geometry, and plaque structure

Figure 11

Temperature contours around an inflamed plaque located in a bending artery. Results shown correspond to two different times during the cardiac cycle: t = 4.4, and 4.6 s. Calculations were obtained using the inlet velocity profile of Figure 2a. In this figure, the macrophage layer dimensions are q ˙ MathType@MTEF@5@5@+=feaafiart1ev1aaatCvAUfKttLearuWrP9MDH5MBPbIqV92AaeXatLxBI9gBaebbnrfifHhDYfgasaacH8akY=wiFfYdH8Gipec8Eeeu0xXdbba9frFj0=OqFfea0dXdd9vqai=hGuQ8kuc9pgc9s8qqaq=dirpe0xb9q8qiLsFr0=vr0=vr0dc8meaabaqaciaacaGaaeqabaqabeGadaaakeaacuWGXbqCgaGaaaaa@2E20@ m = 0.1 W/mm3, l mp = 1,500 μm, d mp = 100 μm, d p = 540 μm, and l f = 50 μm.

Back to article page