Skip to main content
Figure 7 | BioMedical Engineering OnLine

Figure 7

From: Thermal modeling of lesion growth with radiofrequency ablation devices

Figure 7

Comparison of temperature and lesion size development with no tissue perfusion for a 30 volt constant voltage source ablation. Ablation simulation results for a 30 volt constant voltage source ablation with no tissue perfusion. The results on the top half of the figure represent the temperature distribution surrounding the ablation probe in degrees Celsius. The results on the bottom half of the figure represent the percent tissue damage. The numbers listed at the bottom are the lesion volume sizes computed from the 63% cell damage isocontours at each time interval shown.

Back to article page