Skip to main content

Table 1 Summary of the performed image acquisition parameters

From: Quantitative assessment of the impact of biomedical image acquisition on the results obtained from image analysis and processing

Device

Number of images

Resolution [pixel × pixel]

Object of imaging

Additional comments

NICON E 600 microscope (lens: Plan Fluor 100×/130 Oil, eyepiece 10×/22)

40

1024 × 1024

Determination of the extent of proliferation in the regenerating rat liver cells

The test material was analysed under the microscope

Systems for 3D measurement of points of the human body developed in the Department of Photogrammetry and Computer Remote Sensing WGGiIÅš AGH

800

1200 × 1600

Evaluation of postural defects

Images of selected places of the human body, signalled with Styrofoam balls-markers, were obtained using two focus free compact cameras

OCT SS-1000 CASIA, OCT Zeiss Visante OCT and SOCT Copernicus Optopol Tech. SA

100'000

256 × 1024

Evaluation of retinal layer thickness and the iridocorneal angle of the anterior segment of the eye

The images are acquired for the measuring range of 8 × 16 mm

AGEMA 470 and/or 640 AGEMA digital camera QV - 400

503

140 × 140 320 × 240 600 × 400

Evaluation of uneven temperature distribution around paraspinal areas

Patients prior to the test were stripped to the waist and stayed in a room with air temperature of 21°C, in a sitting position without any back support for about 20 minutes. Next, each of them stood with their back to the camera at a distance of 2 m from the lens

Flir SC5200 infrared camera with a photon detector with 3-5 μm spectral range,

80

320 × 256

Evaluation of the correctness of performing ablative and non-ablative treatments in cosmetology

Forcing thermal changes of the skin was done using CO2RE laser with a wavelength of 10600 nm; pulse mode of the laser beam emission, energy density of 4,5 J/cm2, pulse energy of 1–150 mJ, pulse frequency of 16,7 kHz, spot size - 120 μm or 150 μm.

Topcon 3D OCT-2000

25'200

884 × 512

Evaluation of Thickness loss of tooth enamel

Images were obtained in vitro by performing on 180 teeth 7 processing steps: tooth without interference, polishing with paste, etching, application of adhesive system, orthodontic bracket attachment, orthodontic bracket removal, cleaning of adhesive residue.

Corvis tonometer

13'400

200 × 576

Evaluation of the mechanical properties of the cornea and intraocular pressure

Subjects aged 17–63 were healthy (32 people including 16 women) or ill (16 people including 9 women). The ill patients had either AMD or other diseases that cause abnormal pressure in the eye