TY - JOUR AU - Latham, B. AU - Goswami, T. PY - 2004 DA - 2004// TI - Effect of geometric parameters in the design of hip implants paper IV JO - Mater Des VL - 25 UR - https://doi.org/10.1016/j.matdes.2004.01.012 DO - 10.1016/j.matdes.2004.01.012 ID - Latham2004 ER - TY - JOUR AU - Pyburn, E. AU - Goswami, T. PY - 2004 DA - 2004// TI - Finite element analysis of femoral components paper III – hip joints JO - Mater Des VL - 25 UR - https://doi.org/10.1016/j.matdes.2004.01.009 DO - 10.1016/j.matdes.2004.01.009 ID - Pyburn2004 ER - TY - JOUR AU - Jiang, H. PY - 2007 DA - 2007// TI - Static and dynamic mechanics analysis on artificial hip joints with different interface designs by the finite element method JO - Journal of Bionic Engineering VL - 4 UR - https://doi.org/10.1016/S1672-6529(07)60024-9 DO - 10.1016/S1672-6529(07)60024-9 ID - Jiang2007 ER - TY - JOUR AU - Félix, A. E. AU - Vamsi, K. B. AU - Susmita, B. AU - Amit, B. PY - 2010 DA - 2010// TI - Design and fabrication of Co Cr Mo alloy based novel structures for load bearing implants using laser engineered net shaping JO - Materials Science and Engineering: C VL - 30 UR - https://doi.org/10.1016/j.msec.2009.08.006 DO - 10.1016/j.msec.2009.08.006 ID - Félix2010 ER - TY - JOUR AU - Kayabasi, O. AU - Ekici, B. PY - 2008 DA - 2008// TI - Probabilistic design of a newly designed cemented hip prosthesis using finite element method JO - Mater Des VL - 29 UR - https://doi.org/10.1016/j.matdes.2007.03.024 DO - 10.1016/j.matdes.2007.03.024 ID - Kayabasi2008 ER - TY - JOUR AU - Griza, S. AU - Kwietniewski, C. AU - Tarnowski, G. AU - Bertoni, F. AU - Reboh, Y. AU - Strohaecker, T. AU - Baumvol, I. PY - 2008 DA - 2008// TI - Fatigue failure analysis of a specific total hip prosthesis stem design JO - International Journal of Fatigue VL - 30 UR - https://doi.org/10.1016/j.ijfatigue.2007.11.005 DO - 10.1016/j.ijfatigue.2007.11.005 ID - Griza2008 ER - TY - JOUR AU - Bae, J. Y. AU - Farooque, U. AU - Lee, K. W. AU - Kim, G. H. AU - Jeon, I. AU - Yoon, T. R. PY - 2011 DA - 2011// TI - Development of hip joint prostheses with modular stems JO - Computer-Aided Design VL - 43 UR - https://doi.org/10.1016/j.cad.2011.05.004 DO - 10.1016/j.cad.2011.05.004 ID - Bae2011 ER - TY - JOUR AU - Stolk, J. AU - Verdonschot, N. AU - Cristofolini, L. AU - Toni, A. AU - Huiskes, R. PY - 2002 DA - 2002// TI - Finite element and experimental models of cemented hip joint reconstructions can produce similar bone and cement strains in pre-clinical tests JO - J Biomech VL - 35 UR - https://doi.org/10.1016/S0021-9290(01)00213-5 DO - 10.1016/S0021-9290(01)00213-5 ID - Stolk2002 ER - TY - JOUR AU - Gillies, R. M. AU - Morberg, P. H. AU - Bruce, W. J. AU - Turnbull, A. AU - Walsh, W. R. PY - 2002 DA - 2002// TI - The influence of design parameters on cortical strain distribution of a cement less titanium femoral stem JO - Medical Engineering & Physics VL - 24 UR - https://doi.org/10.1016/S1350-4533(01)00124-2 DO - 10.1016/S1350-4533(01)00124-2 ID - Gillies2002 ER - TY - JOUR AU - Senalp, A. Z. AU - Kayabasi, O. AU - Kurtaran, H. PY - 2007 DA - 2007// TI - Static, dynamic and fatigue behavior of newly designed stem shapes for hip prosthesis using finite element analysis JO - Mater Des VL - 28 UR - https://doi.org/10.1016/j.matdes.2006.02.015 DO - 10.1016/j.matdes.2006.02.015 ID - Senalp2007 ER - TY - JOUR AU - Sabatini, A. L. AU - Goswami, T. PY - 2008 DA - 2008// TI - Hip implants VII: finite element analysis and optimization of cross-sections JO - Mater Des VL - 29 UR - https://doi.org/10.1016/j.matdes.2007.09.002 DO - 10.1016/j.matdes.2007.09.002 ID - Sabatini2008 ER - TY - JOUR AU - Bellini, C. M. AU - Galbusera, F. AU - Ceroni, R. G. AU - Raimondi, M. T. PY - 2007 DA - 2007// TI - Loss in mechanical contact of cement less ace tabular prostheses due to post-operative weight bearing: a biomechanical model JO - Med Eng&Phys VL - 29 UR - https://doi.org/10.1016/j.medengphy.2006.02.008 DO - 10.1016/j.medengphy.2006.02.008 ID - Bellini2007 ER - TY - JOUR AU - Rina, S. R. AU - Itoman, M. AU - Mabuchi, K. PY - 2006 DA - 2006// TI - Assessments of different kinds of stems by experiments and FEM analysis: appropriate stress distribution on a hip prosthesis JO - Clin Biomech VL - 21 UR - https://doi.org/10.1016/j.clinbiomech.2006.03.008 DO - 10.1016/j.clinbiomech.2006.03.008 ID - Rina2006 ER - TY - JOUR AU - David, B. D. AU - Goswami, T. PY - 2008 DA - 2008// TI - Finite element analysis of hip stem designs JO - Mater Des VL - 29 UR - https://doi.org/10.1016/j.matdes.2006.12.014 DO - 10.1016/j.matdes.2006.12.014 ID - David2008 ER - TY - JOUR AU - Darwish, S. M. AU - Al-Samhan, A. M. PY - 2009 DA - 2009// TI - Optimization of artificial hip joint parameters JO - Material science and engineering technology VL - 40 ID - Darwish2009 ER - TY - JOUR AU - Speirs, A. D. AU - Heller, M. O. AU - Taylor, W. R. AU - Duda, G. N. AU - Perka, C. PY - 2007 DA - 2007// TI - Influence of changes in stem positioning on femoral loading after THR using a short-stemmed hip implant JO - Clin Biomech VL - 22 UR - https://doi.org/10.1016/j.clinbiomech.2006.12.003 DO - 10.1016/j.clinbiomech.2006.12.003 ID - Speirs2007 ER - TY - JOUR AU - Chen, W. P. AU - Tai, C. L. AU - Lee, M. S. AU - Lee, P. C. AU - Liu, C. P. AU - Chun-Hsiung Shih, H. PY - 2004 DA - 2004// TI - Comparison of stress shielding among different cement fixation modes of femoral stem in total Hip arthroplasty–a three-dimensional finite element analysis JO - Journal of Medical and Biological Engineering VL - 24 ID - Chen2004 ER - TY - CHAP AU - Mahamood, R. M. AU - Akinlabi, E. T. AU - Shukla, M. AU - Pityana, S. PY - 2012 DA - 2012// TI - Functionally Graded Material: An Overview BT - Proceedings of the World Congress on Engineering 2012 Vol IIIWCE PB - London CY - UK ID - Mahamood2012 ER - TY - JOUR AU - Watanabe, W. AU - Inaguma, Y. AU - Sato, H. AU - Fujiwara, E. M. PY - 2009 DA - 2009// TI - A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method JO - Materials VL - 2 UR - https://doi.org/10.3390/ma2042510 DO - 10.3390/ma2042510 ID - Watanabe2009 ER - TY - JOUR AU - Hedia, H. S. AU - Shabara, M. A. AU - El-Midany, T. T. AU - Fouda, N. PY - 2006 DA - 2006// TI - Improved design of cementless hip stems using two-dimensional functionally graded materials JO - J Biomed Mater Res B ApplBiomater VL - 79 UR - https://doi.org/10.1002/jbm.b.30509 DO - 10.1002/jbm.b.30509 ID - Hedia2006 ER - TY - JOUR AU - Hedia, H. S. AU - Shabara, M. A. N. AU - El-Midany, T. T. AU - Fouda, N. PY - 2004 DA - 2004// TI - A method of material optimization of cementless stem through functionally graded material JO - Int J Mech Mater Des VL - 1 UR - https://doi.org/10.1007/s10999-005-3307-4 DO - 10.1007/s10999-005-3307-4 ID - Hedia2004 ER - TY - JOUR AU - Gong, H. AU - Wu, W. AU - Fang, J. AU - Dong, X. AU - Zhao, M. AU - Guo, T. PY - 2012 DA - 2012// TI - Effects of materials of cementless femoral stem on the functional adaptation of bone JO - Journal of Bionic Engineering VL - 9 UR - https://doi.org/10.1016/S1672-6529(11)60098-X DO - 10.1016/S1672-6529(11)60098-X ID - Gong2012 ER - TY - STD TI - Oshkour AA, Osman NA, Yau YH, Tarlochan F, Abas W: Design of new generation femoral prostheses using functionally graded materials: a finite element analysis. Proceedings of the institution of mechanical engineers, part H. Journal of Engineering in Medicine 10.1177/0954411912459421 ID - ref23 ER - TY - STD TI - ANSYS Version 14. ANSYS Inc, Canonsburg Pennsylvania, USA; 2011. ID - ref24 ER - TY - BOOK PY - 2008 DA - 2008// TI - Dassault Systemes PB - Mississauga Ontario CY - Canada ID - ref25 ER - TY - JOUR AU - Fouad, H. PY - 2010 DA - 2010// TI - Effects of the bone-plate material and the presence of a gap between the fractured bone and plate on the predicted stresses at the fractured bone JO - Medical Engineering & Physics VL - 32 UR - https://doi.org/10.1016/j.medengphy.2010.05.003 DO - 10.1016/j.medengphy.2010.05.003 ID - Fouad2010 ER - TY - JOUR AU - Fouad, H. PY - 2011 DA - 2011// TI - Assessment of function-graded materials as fracture fixation bone-plates under combined loading conditions using finite element modelling JO - Medical Engineering & Physics VL - 33 UR - https://doi.org/10.1016/j.medengphy.2010.11.013 DO - 10.1016/j.medengphy.2010.11.013 ID - Fouad2011 ER - TY - JOUR AU - Fouad, H. PY - 2011 DA - 2011// TI - In vitro evaluation of stiffness graded artificial hip joint femur head in terms of joint stresses distributions and dimensions: finite element study JO - Journal of Materials Science: Materials in Medicine VL - 22 ID - Fouad2011 ER - TY - JOUR AU - Boger, A. AU - Bohner, M. AU - Heini, P. AU - Verrier, S. AU - Schneider, E. PY - 2008 DA - 2008// TI - Properties of an injectable low modulus PMMA bone cement for osteoporotic bone JO - Journal of Biomedical Materials Research Part: Applied Biomaterials VL - 86 UR - https://doi.org/10.1002/jbm.b.31044 DO - 10.1002/jbm.b.31044 ID - Boger2008 ER - TY - CHAP AU - Abdullah, A. H. AU - MohdAsri, M. N. AU - Alias, M. S. AU - Tardan, G. PY - 2010 DA - 2010// TI - Finite element analysis of cemented Hip arthroplasty: influence of stem tapers BT - Proceedings of the international Multi Conference of engineering and computer scientists ID - Abdullah2010 ER - TY - CHAP AU - Sivasankar, M. AU - Chakraborty, D. AU - Dwivedy, S. K. PY - 2004 DA - 2004// TI - Finite element analysis of composite hip prosthesis BT - National conference on biomechanics ID - Sivasankar2004 ER - TY - JOUR AU - Abdullah, A. H. AU - Jaafar, E. F. AU - Nasir, N. AU - Abdul Latip, E. N. AU - Tardan, G. PY - 2011 DA - 2011// TI - Influences of prosthesis stem lengths in cementless total Hip arthroplasty JO - Applied Mechanics and Materials VL - 52–54 UR - https://doi.org/10.4028/www.scientific.net/AMM.52-54.2088 DO - 10.4028/www.scientific.net/AMM.52-54.2088 ID - Abdullah2011 ER - TY - CHAP AU - Rawal, B. R. AU - Ribeiro, R. AU - Rajesh Malhotra, R. AU - Bhatnagar, N. PY - 2012 DA - 2012// TI - Design and manufacturing of femoral stems for the Indian population BT - J Manuf Process ID - Rawal2012 ER - TY - JOUR AU - Yang, C. T. AU - Wei, H. W. AU - Kao, H. C. AU - Cheng, C. K. PY - 2009 DA - 2009// TI - Design and test of hip stem for medullary revascularization JO - Medical Engineering & Physics VL - 31 UR - https://doi.org/10.1016/j.medengphy.2009.06.001 DO - 10.1016/j.medengphy.2009.06.001 ID - Yang2009 ER -