Skip to main content
Figure 2 | BioMedical Engineering OnLine

Figure 2

From: Comparisons of maximum deformation and failure forces at the implant–abutment interface of titanium implants between titanium-alloy and zirconia abutments with two levels of marginal bone loss

Figure 2

Static loading of an implant–abutment component. (A) overview, (B) exploded and assembled diagrams of the test setup, (C) close-up view of Group B2 (simulated bone loss of 1.5 mm with a zirconia abutment), and (D) close-up view of Group A1 (simulated bone loss of 3.0 mm with a titanium-alloy abutment).

Back to article page

BioMedical Engineering OnLine

ISSN: 1475-925X

Contact us