Figure 2From: In vitro corrosion of ZEK100 plates in Hank's Balanced Salt Solution Picture of the in vitro corrosion testing setup. 1: Glass basin with Hank's Balanced Salt Solution. 2: The corrosion medium was warmed in a water bath to 37.4 +/- 0.5°C. 3: HBSS passes the test system with the specimens with a laminar flow rate of 2.5 to 3.5 ml/min Temperature is checked with a thermometer. The system is protected against heat loss with styrofoam. 4: The flow rate was maintained with a pump. The solution was then discarded in a container.Back to article page