Skip to main content
Figure 2 | BioMedical Engineering OnLine

Figure 2

From: A Parametric Study Delineating Irreversible Electroporation from Thermal Damage Based on a Minimally Invasive Intracranial Procedure

Figure 2

Schematic of the brain and electrode configuration used in the numerical models. The thermal probes used to measure the temperature during the experimental procedure are shown in light gray on the right panel. Probe 1 (P1) and probe 2 (P2) were located near the electrode tip and 10 mm along the insulation of the other electrode, respectively.

Back to article page